BMW tried to have a very efficient global engine with specific high output for it's design.
In Automotive engineering an engine puts out less pollutants with complete combustion. Any engine will...
Type: Posts; User: Nivo
BMW tried to have a very efficient global engine with specific high output for it's design.
In Automotive engineering an engine puts out less pollutants with complete combustion. Any engine will...
Did it when released, thousands of miles later, still working good.
NEW MS45 feature, Soon I will test out turning off SAP and the post cat O2 sensors. great for guys with headers and going turbo or supercharged.
With the real time tuning it will be a board...
Realtime tuning solution might be a possibility!
Does anyone have their DME Bin files?
BimTun says, "We have a few, but would like to get as many as possible to provide support for all versions."
Currently as I stated, they only have a few...
And that is a deal as Bimmian sells them for $350.
I have seen them for around $200 here and there.
My cheapo Winterforce in 205/60/16 work me every time no studs in them yet either and I have done 8" of snow driving (we have had over 80" of snow so far in y town here in Mass)
Sonar from Taipei Taiwan, apparently they use Philips LEDs. US Distributor is Spyder Auto in California.
Apparently they come in 4 different versions. Saw these a while back when I wanted to...
You can with the emulator dimsport sold. But too expensive fir the end user.
Frank at TTFS does real time tuning in Maryland.
Yes, its realtime tuning. It data logs too. Not bad tuning suite for $415. Includes license, software, daughter board and OBDI cable. Tuned through the port.
Lol, no man... it's $68 for Sedan and $64 for coupe per month. That's my full coverage at 150k/300k. Probably would be cheaper if i went 20k/40k. My 2 Z Cars are $588/year Grundy classic.
This is...
Yes, you must know what you are doing. Because you have a lot of maps at your finger tips.
Here is Nistune that I use for my Twin Turbo Z cars. And that is a walk in the park software/Maps...
For MS45 it is still at its beginning stages not as far as MS43 or MSS54.
Hey guys long time I have not posted. Work keeps me busy.
I have found a solution for those who want to tune their own cars. Well limited right now to the MS45 software versions available as the...
my insurance for both are $687 for the '05 sedan and $643 for the '04 coupe full coverage 150k/300k. my coupe got hit and almost got totaled until I talked to the adjuster that I can do the work at...
Stateway
15093
Quotes
15092
Intercity lines
15094
Intercity lines
144,777.
Flanges done, going to their owners.
http://www.e46turbo330ci.com/wp-content/uploads/2014/06/IMG_0570.jpeg
Also in the works:
Intake runner base plate to make a plenum.
...
Update, it has been well over 1 year with the Mellotone fabric and it has never shifted color from black.
So I would give this Fabric two thumbs up.
Also the spray adhesive has yet to give out.
The DataLogger now does Knock voltage.
Cool.. welcome
The cheapest custom dyno tune quote I have seen for a custom turbo kit is $3,500 and that was doing BDM tuning so after a pull the DME had to come out tuned/flashed then installed again then another...
S-Chip AST – Mike at S-Chip AST will tune your DME if you send it in or remote tuned. You will need a Galletto 1260 or Modified VAGCOM KKL OBD Cable and the EOBD flash/write software. You can ...
This has been known some time now but I am getting around to posting it.
The machine shop agreed to make the M54 BMW guys an aluminum intake manifold flange to make custom intake manifolds....
Ok guys and gals, to tune the MS45 DME tuners had to flash it on the bench using the BDM interface on the ECU PCB. The ECU would be opened, then powered up using a +12 volt power supply and using a...