Search:

Interesting. Not sure what the purpose is but I'm sure they have a good reason

It's hard to tell as I can't zoom in on the pic but the outer right side looks to thin to be a washer and an aluminum washer against an aluminum surface doesn't make a lot of sense

Not entirely certain what you're asking but the bung between cylinders 1&2 for coolant plug is on a curved surface so it would have to have a machined flat surface.

That's pretty cool. Any idea why?

23831

2006 vert that came with RE040's

1. If you had a manual it would feed the clutch slave cylinder.

11. It's there just to jack up your hand every time you mess with the airbox. Either that or some other country has something...

It takes less time to remove the bumper than to mask it off

Yeah the shifter is 180 degrees off. You could put the shift knob on upside down :)

Here's mine. EVO3 and DSSR sticking straight up in neutral. 21985

Just noticed your PM too. That's definitely not right. In neutral it doesn't sit directly in the center because it has to move 2 positions to the left and only one position to the right. But, it is...

You just need to go to the grocery store and buy 2x 1 gallon jugs of distilled water. Water the plants with one and then pour half the second into the first so you have both with equal amounts of...

And not this dyno:

https://www.facebook.com/districtspeedfans/videos/876638255720068/

Many times. You have to disassemble the switch to mod verts and coupe's to get the all-up/dwn feature to work. I pull the buttons out as I find it much easier to assemble the switch and then push the...

You just use a little flat blade screwdriver to pry up on the white area below the hole.

He circled the DISA connection in the photo. Some people say the NJ 4k fix disables the DISA so this may be why he doesn't feel a difference.

+1

That is definitely the DISA connector

They do come apart easily though so even a broken one (electrically) would get you what you need.

I didn't know we were disagreeing. There's a good chance it doesn't make any difference and the fact that they spec it for cars doesn't have anything to do with the DSC ABS system. All we can do is...

I wasn't trying to imply that using DOT4 would cause DSC or ABS malfunctions, just that these systems might not be as effective as they should be.

We discussed this in another thread and no one has ever come up with an official explanation from BMW on why our cars call for DOT4LV. Most people just use DOT4 and report that it works just fine. I...

Looks to me like the black pieces of plastic on the handle broke off of here

18892

:facepalm

Who let this guy in here?

My preference for the Schwaben was based on the fact that I thought I paid around $120 for my MityVac. I just looked it up though and I paid $85.49 on Amazon and it is now $93.66:
...

Nope. I have this one:

http://www.tooltopia.com/mityvac-7201.aspx

My MityVac works just fine but since then Schwaben has come out with one that has a gauge and quick release fittings:

http://www.ecstuning.com/BMW-E46-330Ci-M54_3.0L/ES2774825/