I can’t imagine that would throw a code. Do you know what all is involved with wiring in heated seats? I’d be interested if it’s not too difficult
Type: Posts; User: TLL0003
I can’t imagine that would throw a code. Do you know what all is involved with wiring in heated seats? I’d be interested if it’s not too difficult
As far as I know, the switches are not interchangeable and this won't work. Someone correct me if I'm wrong
I've got the wire run and the programming supposedly don't but nothing happens when I press the button... Still some work to do there
Now I just have to get my TPMS working...
231852318623187
I ended up getting everything installed and it all works well. The green still dimly flashes when off but it's hardly noticeable. Really like to stock look and love how it makes the...
23131
Mine looked exactly like this from the first post of this thread
https://vimeo.com/149552753
May not be of any help, but here is a video of what I'm referring to
23098
Here is the best picture I can get. At this point, the board has been through a lot after removing and reattaching the LEDs and button over and over. It's seen better days but still works...
So is there a way to fix it so the green doesn't flash when it should be off? I'm learning as I go here and don't know a ton about circuit boards honestly. As I have it wired now, green =sport and...
How confident are you on that? I plugged it into the car and it cycled through off, then green, the red and actually worked! At this point I'm not opposed to resoldering/flipping the lights. The only...
Update: reversed the polarity on the red LED so positive green is up and positive red is down. Seems to work great, green on first, red on second BUT now the green LED flashes very dimly when it...
23077
That's the best picture I can get right now
I'm not really sure what that means, but should the positive side of the green diode be facing the opposite side as the red diode?
If the polarity on the red diode is reversed, wouldn't it not light up at all? The positive sides of each the red and green diode are facing the top of the board. Is this incorrect? I will take some...
I've bridged the positive sides(top) of the two LEDs. I also bridged between the left side of the button and the negative (bottom) of the red LED. What bridge would cause both lights to flash when...
Let's see if anyone who has done this mod can help me out. I have soldered the board exactly as shown in the DIY, but when I install it in my car both the green and red LED flash together. I have a...