Search:

Best mod ever!

Sent from my XT1064 using Tapatalk

You know you're a hardcore enthusiast when you've got not 1, nor 2, but 3 (!) spare roundels. :)

Thanks JR.

I numbered them and put them back in the same hole. I figure it can't hurt doing it that way. :)

The torque spec for the VCG bolts is quite low, around 8 lbs-ft. The advice I saw on other forums is to tighten them until they stop turning and then firm them up just a little. Use 1/4" drive,...

Here it is:

http://youtu.be/ugPUqjjKRz8

Discovered that the photo included with my post above had bad html, so it showed up on tapatalk, but not on web. Here it is again:

...

Started changing my VCG. Came off mostly in one piece but there was a fingernail size chunk that decided to hide in the valve train. The gasket around the spark plug holes were more brittle and each...

Are there zhp specific alignment settings?

Unicorns are real !

Same in Vancouver. TransLink has its hands in your pockets in several different ways, gas tax being one of them.

+ 1

Sent from my Galaxy Nexus using Tapatalk

Got my summer wheels/rubber back on and installed most of my led interior kit (damn C pillar housings).


Sent from my Galaxy Nexus using Tapatalk

I know what that's like. Had my first drive in a hundred days yesterday.


Sent from my Galaxy Nexus using Tapatalk

Installed my new AFE intake.

Before:

http://img.tapatalk.com/d/14/05/25/gu4ezude.jpg

After:

http://img.tapatalk.com/d/14/05/25/ahyvepu4.jpg

Here it is at ECS Tuning with good pictures: http://www.ecstuning.com/Search/83220397244/ES1885136/

Pulled the MAF and hit it with some CRC Sensorkleen (called MAF cleaner in the US market).

I remember reading about this on another bmw site. The theory is that on narrow streets in some European cities you would leave the side marker lights on when its dark out so that passing cars won't...

Can u shoot a pic of the backside too? Is it just the center pin that takes any side loading (e.g. where car is at a bit of angle because one side is jacked up high), or are there flanges on the...

A picture being worth a thousand words...

http://i1254.photobucket.com/albums/hh619/Stewbie2000/Mobile%20Uploads/IMG_20131111_110531_zps8ddec151.jpg
...

Yes, it comes in a tube with plastic end caps. The tube snugs in nicely to a blank spot in my tool kit (not sure if its meant to be blank or if a PO lost a tool), so I always have it with me.

I...

Saw a couple of frosty mornings this week, so decided to take advantage of the long weekend and put the winter rubber on.

Every spring / fall when I do the tire swap, I also like to 1) adjust the...

FYI - Bavarian auto has diy video for doing the ccv on an M54.

I'll try to remember to post a pic after I put them on the car.

Did my fall oil change and prepped my winter wheels and rubber for duty. Gave them a good cleaning inside and out, adjusted the pressures, and then treated them with Armour All wheel protectant. ...

My new summer tires arrived today! Bridgestone Potenza S04 Pole Positions replacing some very worn RE050A Pole Positions. Rear only. Fronts have plenty of tread.

I'll have them mounted and...