Search:

Type: Posts; User: racer2086

Page 1 of 6 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    0
    Views
    63

    FS: ZKW Xenons with AL lenses

    Asking $150 for the PAIR of ZKW lights, which includes AL projector lenses that need slight adjusting*, but no xenon bulbs. I will add pics when I get home. Specific details of condition are below....
  2. Replies
    64
    Views
    2,626

    Cleaned up the silver cube trim with a...

    Cleaned up the silver cube trim with a toothbrush, soap and water. You don't realize how dirty it is until you brush it, rinse it, and dry it. They really pop once cleaned. Not great pics sorry
    ...
  3. I wanted the front covers when I first saw this...

    I wanted the front covers when I first saw this part out, but shipping for the whole seat would be cost prohibitive.
  4. Replies
    64
    Views
    2,626

    I'll have to add mileage and log this stuff to...

    I'll have to add mileage and log this stuff to the first page, but about 500-1000 miles ago, I replaced all 6 coils with new Delphi ones from FCP in hopes that would take care of the 2800 rpm...
  5. My lower half trim had some nicks in it that show...

    My lower half trim had some nicks in it that show up white, which is why I was considering this. Given the price point, though, I think I'll just get my wheel rewrapped. It just makes more financial...
  6. Wow great post thank you. I did not think of just...

    Wow great post thank you. I did not think of just sticking it to another part of the window to test. Also, didn't realize I could flash it with NCS. I will download the file from it and see what it...
  7. Replies
    64
    Views
    2,626

    PDC Retrofit also done! And at the same time, I...

    PDC Retrofit also done! And at the same time, I re-clearcoated the top of the back bumper. The clearcoat was entirely stripped from the bumper above the black trim. I figured I should do all of...
  8. Replies
    64
    Views
    2,626

    Found a set of metal pedals in the junkyard. ...

    Found a set of metal pedals in the junkyard. They were for an auto, so I just used the dead pedal.

    https://live.staticflickr.com/65535/48036907887_3154f0317b_b.jpg

    And then it got a full...
  9. Replies
    64
    Views
    2,626

    For the sport button, I bought LEDs off amazon...

    For the sport button, I bought LEDs off amazon and used some thin gauge wire I had to solder to them. I did not glue them to the button circuit board, but rather just glued them together and then...
  10. Hmmm maybe we could work something out then... ...

    Hmmm maybe we could work something out then... It would be great to not have my car down to get the wheel rewrapped.
  11. Replies
    64
    Views
    2,626

    Haven't updated this thread in a long time. The...

    Haven't updated this thread in a long time. The car has been very spoiled in the last 2 months...

    Both front window regulators have been replaced. The passenger side had a crappy aftermarket one...
  12. You could sell the airbag separate if you want. ...

    You could sell the airbag separate if you want. I would buy the wheel to get it recovered if it was cheap and someone else in this thread didn't go for it first.
  13. So I removed the rain sensor again and cleaned...

    So I removed the rain sensor again and cleaned all silicone from the window and prism. This time I used 3M VHB transparent double-sided tape. It is crystal clear and the prism is stuck to the window...
  14. Good idea! The shop is called Lex Wheel Repair in...

    Good idea! The shop is called Lex Wheel Repair in Brandon, FL. Tiny place. The guy does everything himself, so he's who you deal with. Good guy who cares about his work and his customers.
  15. So I took it to the wheel guy and all 4 were...

    So I took it to the wheel guy and all 4 were bent, the right front the least bad of the 4. He rebalanced everything after and I took it on the highway finally this past Friday. Wow the car is...
  16. They work in intermittent mode if I pull the fuse...

    They work in intermittent mode if I pull the fuse or pull the wire from the rain sensor. With the sensor plugged in the wipers make the first wipe when put in sensing mode. Everything is just as it...
  17. You can see the bubbles in the second to last...

    You can see the bubbles in the second to last picture I posted. That's what the "white flecks" are in the silicone.

    I've reinitialized in INPA a thousand times with no improvement in any sensor....
  18. Thank you for the picture. Mine is the same 2x1"...

    Thank you for the picture. Mine is the same 2x1" dimension. Here are pics of what I have. Some bubbles have appeared in the 24+ hours that it has been curing as you can see in the picture. ...
  19. Oh yeah sensor is plugged in. I've tried 6...

    Oh yeah sensor is plugged in. I've tried 6 sensors.

    Windshield is a Fayuo. Clearly some knock off. I'll take a picture today and post it up. The cut out for the rain sensor looks lke the size...
  20. Rain Sensor Inop - can someone measure the cutout?

    Bought my car with an aftermarket windshield. The rain sensor didn't work from day one when I got it. Reading around people thought it was because of the aftermarket glass and prism that the sensor...
  21. 3 bent wheels; can they be successfully straightened?

    Hey guys. Few questions. Car is still pretty new to me, so just found this out. Went to get the front tires balanced due to a shake above 80mph.

    As soon as he put it on the balancer, the balance...
  22. Replies
    8
    Views
    530

    6 month old Post, but how did it turn out? About...

    6 month old Post, but how did it turn out? About to do this myself.
  23. Wanted to update this. I smoke tested the car...

    Wanted to update this.

    I smoke tested the car and replaced all 6 coils with Delphi coils. Below is a pic of #5 and #6 original Bosch coils. While I never would have said the car wasn't smooth...
  24. What if my monitor doesn't even work? Like I...

    What if my monitor doesn't even work? Like I can't even access the TPMS menu in INPA. Which it seems others have no problem accessing. Is this a software version issue? Can updated software be...
  25. Well, I performed this retrofit according to the...

    Well, I performed this retrofit according to the instructions on page 1, but I never read past that until now, which I wish I did. I would have realized my car has the CI12 module and this was all a...
Results 1 to 25 of 134
Page 1 of 6 1 2 3 4