Search:

When I had a leaky injector it would do the long crank to stumble if it had sat for ~1-4 hours. The leaked fuel would have time to evaporate overnight so it would start up fine. Was very confusing.
...

FYI that dent was molded into it to fit the facelift coupes and you can get much more than $150 for it

I've used an app called AfterFocus that does that as well

Hey I saw your PM but wanted to answer here so everyone else had the info.

Reducing the diameter of the whole bushing was critical to getting a good fit. @Galapolis can elaborate but I think we...

Agree on a topside RACP solution and will also throw in an oil pan baffle and M3 fuel tank baffle to avoid starvation.

Yep, it always got in the way for me so I'd just keep it flipped up. Then it would slam down when I had to brake hard and scare the hell out of me so I ran a bungee cord across the backrests to...

Only downside to the armrest delete that I've noticed is that passengers don't have anywhere to put their arm so they just kind of awkwardly hang it in their lap.

Those nerds can pound sand...

Nice pickup and glad you joined us here to document the refresh!

Have you located where the diff is leaking? If it's just from the cover, then that's an easy reseal while you're swapping the...

So do u guys pull the front of your underoos down by the waistband to take a leak or do you snake your peepee through the pouch maze?

I don't see the poll on tapatalk but I am 100% with you on this one (the jams, the key orientation, and the take on R. Kelly as a human).

Thumb on buttons gang represent

15mm is about as far as I like to go with extended bolts. I've had several sizes of these (including the 15mm) and have been really happy with them.

https://smile.amazon.com/dp/B01ICB0XZ0/

You...

My strategy is gonna be to leave it since it's a 15 year old shitbox

First oil change since 8/2019 happening now tho...
...

Oops
https://uploads.tapatalk-cdn.com/20201204/84e52f11d57214cc2bf4e939ab1b92ba.jpg

Does this replace the sunroof+shade? This is awesome

^ absolutely

Hotchkis uses aluminum plates for the same effect. They also completely sidestep the goofy tab mount in the rear.

Love my mf'n pinstripez



OE e46 M3 mirrors are ~150g less than stock so I'm trying to decide if I like them and can lighten them any. Not sure about either.

In other news, I'm still rocking the e36m ebay rep mirrors. I'll throw a bunch of pics here since I can't remember what thread I had posted them in.
...

Lol I'm happy with the M54. Hoping to get it dyno tuned once I am happy with the exhaust. A little more torque paired with the 3.23 lsd *chef's kiss*Hopefully sometime over the winter. I'm not...

I run cheap all seasons through the NC piedmont winter (snows like 2-3 days tops) then go back to max performance summers (ps4s) once the nightime lows are consistently >40F. If I wasn't doing...

After the interior is stripped and the roll cage is in



Listen here, smooth brain, I control variables when and how I determine it to be necessary. I only added the foam to the drivers side...

Looks like I swapped them out for the stiffer OE RTABS (Z4M spec) and limiters in Nov 2018, 11k miles ago. Funny enough it was shortly after a track day where I was like "don't need no LSD this shit...

lmao I saw the pic, googled Tesla Model 3 mirror, saw that it didn't match, and went on about my day

Trevor is either going zero emissions electric or rolling coal with a tuned diesel sedan. There...

Ah that's it! Probably would have figured it out on my own if I had found the bag of 6 splash shield screws at the same time lol

Thanks guys!

Anyone know what these plastic washers may be? The number on the bag isn't returning anything, but it looks like I bought 6 of them for something. Thumb for scale....

Don't think it's necessary at all. The only other line I would change with it is the vacuum line that goes to the F connector, and that's only if it falls apart when you disconnect it.