Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 56 of 78 FirstFirst ... 646545556575866 ... LastLast
Results 551 to 560 of 774
  1. #551
    Join Date
    Jan 1970
    Location
    Branford, CT
    Posts
    16,055
    2017-05-03 -- 267,802 -- Expansion tank replaced (OE BMW), oil top up (Mobil1 0W-40 Synthetic)
    BP
    2005 330i ZHP / 6MT
    Imolarot / Naturbraun
    2003 330iT / 6MT
    Orientblau / Naturbraun




    It's not the car you drive, it's how you drive it.

  2. #552
    Join Date
    Jan 1970
    Location
    Branford, CT
    Posts
    16,055
    2017-05-12 -- 268,321 -- Oil top up - 1 quart (Mobil1 0W-40 Synthetic)

    2017-05-27 -- 269,262 -- Oil top up - 1 quart (Mobil1 0W-40 Synthetic)

    2017-05-30 -- 269,837 -- Oil top up - 0.7 quart (Mobil1 0W-40 Synthetic)

    2017-06-14 -- 270,761 -- Flushed brake fluid (ATE Type 200)

    2017-06-18 -- 271,037 -- Oil top up - 2 quarts (Mobil1 0W-40 Synthetic)
    BP
    2005 330i ZHP / 6MT
    Imolarot / Naturbraun
    2003 330iT / 6MT
    Orientblau / Naturbraun




    It's not the car you drive, it's how you drive it.

  3. #553
    Join Date
    Sep 2011
    Location
    San Francisco, CA
    Posts
    6,847
    Your imola is an oil-holic.

  4. #554
    Join Date
    Jan 1970
    Location
    Branford, CT
    Posts
    16,055
    Thanks for reminding me.
    BP
    2005 330i ZHP / 6MT
    Imolarot / Naturbraun
    2003 330iT / 6MT
    Orientblau / Naturbraun




    It's not the car you drive, it's how you drive it.

  5. #555
    Join Date
    Nov 2016
    Location
    Atlanta GA
    Posts
    1,279
    is this a bad time to say that my engine has too much oil and wont burn any causing my oil temps to over around the 210 mark at all times even at idle lol.....

    we over filled a tad then on top added a liquimoly additive similar to that lucas stuff that just makes the oil more oily?? anyways im going to drain some soon. probably half a quart maybe a quart
    2003 ZHP 332i | S54 6 speed
    2002 ZHP Touring | M54 6 Speed

  6. #556
    Join Date
    Jan 1970
    Location
    Branford, CT
    Posts
    16,055
    2017-07-04 -- 272,424 -- Oil top up, 1 quart (Mobil1 0W-40 Synthetic); replaced throttle body (swapped Dinan for stock throttle body); replaced intake manifold vacuum line (used a smaller inner diameter for a tighter fit)
    BP
    2005 330i ZHP / 6MT
    Imolarot / Naturbraun
    2003 330iT / 6MT
    Orientblau / Naturbraun




    It's not the car you drive, it's how you drive it.

  7. #557
    Join Date
    Jun 2014
    Location
    Toronto, ON
    Posts
    1,162
    Quote Originally Posted by az3579 View Post
    replaced throttle body (swapped Dinan for stock throttle body)
    What prompted this replacement with the stock TB?
    anandoc

    2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)

    aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes


  8. #558
    Join Date
    Jan 1970
    Location
    Branford, CT
    Posts
    16,055
    Quote Originally Posted by anandoc View Post
    What prompted this replacement with the stock TB?
    My car drives like crap with the AC on. The revs drop way too quickly, making it very difficult to rev match on the upshift. I was hoping the throttle body was to blame (it was a long shot)

    The main reason I swapped wasn't that, however. My tech friend suggested I swap it to see if it could be causing a mixture prep code I'm getting. I replaced the MAF in 2014 but I have a feeling it needs to be done again. Since I already have the throttle body, it was an easy test.

    We'll see if the codes come back, which I expect to happen.

    Sent from my Pixel using Tapatalk
    BP
    2005 330i ZHP / 6MT
    Imolarot / Naturbraun
    2003 330iT / 6MT
    Orientblau / Naturbraun




    It's not the car you drive, it's how you drive it.

  9. #559
    Join Date
    Jun 2014
    Location
    Toronto, ON
    Posts
    1,162
    I would be interested in your findings.

    I have significant increase in noise/vibration when I turn on the AC. There is also a noticeable lack of power as well. Haven't gotten around to cleaning out the TB though...
    anandoc

    2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)

    aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes


  10. #560
    Join Date
    May 2011
    Location
    Charleston SC
    Posts
    6,149
    Autozone.com
    Quote Originally Posted by az3579 View Post
    My car drives like crap with the AC on. The revs drop way too quickly, making it very difficult to rev match on the upshift. I was hoping the throttle body was to blame (it was a long shot)

    The main reason I swapped wasn't that, however. My tech friend suggested I swap it to see if it could be causing a mixture prep code I'm getting. I replaced the MAF in 2014 but I have a feeling it needs to be done again. Since I already have the throttle body, it was an easy test.

    We'll see if the codes come back, which I expect to happen.

    Sent from my Pixel using Tapatalk
    What are the codes you are getting? I'm getting mixture prep codes too. I was thinking it's the SC tune but maybe not...
    Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
    M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
    H&R sport springs,
    UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
    Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers

Page 56 of 78 FirstFirst ... 646545556575866 ... LastLast

Similar Threads

  1. Jersey Graphite Maintenance Log
    By kayger12 in forum Maintenance
    Replies: 61
    Last Post: 11-03-2014, 02:50 AM
  2. Need maintenance intervals.
    By DESANT in forum Maintenance
    Replies: 16
    Last Post: 05-30-2011, 10:05 AM
  3. First bit of mechanical maintenance
    By static667 in forum Maintenance
    Replies: 8
    Last Post: 03-17-2011, 01:26 PM
  4. Replies: 17
    Last Post: 01-05-2011, 11:34 AM
  5. General, maintenance...needs to be more specific.
    By Washburn in forum Suggestions & Ideas
    Replies: 19
    Last Post: 12-26-2010, 05:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •