Loaded up some backgrounds.
Loaded up some backgrounds.
Last edited by WOLFN8TR; 10-25-2013 at 07:33 PM.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Last edited by WOLFN8TR; 10-25-2013 at 07:32 PM.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
The ///M one is the best.
In the market for an E90 M3
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
iPhone 5 Test
I purchased an Apple 30 Pin to Lighting adapter. The phone does charge and plays the music from your phone. It does show the correct song that is playing. I tried changing the songs via the steering controls and it was intermittent. About every 4 pushes of the button it would change. Then after about 5 minutes of testing all the functions the screen goes BLUE! Everything froze and a warning appeared in Chinese! I shut down the unit and restart, same screen. Unplugged the iPhone 5 and restart the unit, same. Removed the Nav SD card and restart the unit, back up and running.
I was gonna get the iPhone 5s until testing this out.
Last edited by WOLFN8TR; 09-25-2013 at 03:33 PM.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Anyone else having/reporting this issue?
Did you get the canbus #2? It seems that the new wiring requires the orange wire to be connected to reverse.
http://grab.by/qRcc
Tony's ZHP "Wulf" '03 Silver Gray | Valentine 1 Radar Detector| Alcantara | BMW Performance Intake | F10 M5 Knob | Auto-dim Retrofit | BMW Alarm | Performance Grilles | OEM Roof Rack | Rain Light Sensor Retrofit | Eonon D5150 Head Unit | BMW OEM Clear Lens
I do but I haven't installed my backup camera yet. PM TomTomTuning, he was working on this a few weeks. His worked with the V1 but not with the V2.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
So I did more research and concluded that the orange wire is needed to have the reverse camera working with the new canbus v2 and harness. I actually soldered a blue wire to the orange (reverse) wire and connected to a blue/yellow wire in the glove box.
Shown in the diagram below is the wiring to the reverse light. This box is on top of the fuse box.
[IMG][/IMG]
Connected like so.
I have a lot of wires for retrofitting in my glove box if you all are wondering.
Tony's ZHP "Wulf" '03 Silver Gray | Valentine 1 Radar Detector| Alcantara | BMW Performance Intake | F10 M5 Knob | Auto-dim Retrofit | BMW Alarm | Performance Grilles | OEM Roof Rack | Rain Light Sensor Retrofit | Eonon D5150 Head Unit | BMW OEM Clear Lens
Awesome Tony!
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k