ZKW Burnt Bowl OEM Replacements

[Clemsone46]

Have 2.5 sets available for immediate shipment.
PM me if interested
Thanks
Max

[Clemsone46]

I have a single bowl left, no more complete sets but if you'd like to get on the list or are interested in a single bowl, PM me
Thanks
Max

[howe11]

I'm interested in a set. I sent a PM. Thanks!

[SCA]

I am interested in a set. PM sent. Thank you!

[Clemsone46]

All PM's returned, thanks!
Max

[Clemsone46]

Have one set of these available for immediate shipment.

Max

[Clemsone46]

Still have one set, possibly two, for immediate shipment.

Max

[JPMo]

What are the shades and should I get the replacement bowls with them?

[Clemsone46]

What are the shades and should I get the replacement bowls with them?

PM'd
Just an FYI to others with the same question, I offer the bowls with the auto-leveling shades and motors for convenience. This allows an easier removal and drop-in of the new bowls.

All bowls are sold but taking names for the next batch.
Max

[JPMo]

Just performed the swap with the refurbished bowls with shades I got from Clemsone46. I am a novice DIYer and was able to complete the swap with reinstallation in about 4 hours. The hardest part for me was figuring out how to remove the actual projector housing, once I discovered it took a bit of force, the 2nd set took 30min tops to perform. I would recommend getting the bowls with the shades and motors attached. Its an additional cost but made the swap so much easier to do. I know this probably isn't a permanent solution but Im hoping to get a year or 2 out of the refurbs. I'll update if anything changes.

The good: MASSIVE difference compared to the burnt bowls. Im running the Osram CBI xenon bulbs as well and Im almost ashamed to drive with this amount of light output and I feel like I'm blinding people. I'm not used to seeing light reflect off signs lol

The bad: Being a novice DIYer, I broke way too many things with my biggest issue being a windshield washer fluid leak caused during the headlight re-install while i was pulling at the lower trim/nozzle. The reservoir completely drained itself in an hour or so. I tend to use my washers quite often so this is very disappointing. Hopefully it's an easy fix.

**I was going to post pics but it keeps failing to upload**