ZHPMafia.com Authorized Vendor
Wiring aint really my thing so could anyone tell me (long shot i know) which of these wires might be hot and ground? 2 wires (1 hot/1 ground) would go to a power shade the other 2 i would tap into my cig lighter wires i just have no idea how to pair them up to make the up down feature work
any help would be much appreciated
Capo
Tony!
Thumbs, iPhone, Tapatalk.
Campieri
You need to be more specific. Please include the color and stripe along with their pin locations.
Is this for an e36?
Sent from my GS3.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
ZHPMafia.com Authorized Vendor
came out of a 7 series i need to figure out how to unclip it to see what wires/colors goes to what pins etc.
Enforcer
http://www.bmw-planet.com/diagrams/r.../e46/index.htm
Taking a guess that wire 6 is not installed??? VI isn't one of your colors either, so I don't know. Maybe you can find the particular power shade drawing.
ZHPMafia.com Authorized Vendor
numbers are just for pin/wire colors reference
ZHPMafia.com Authorized Vendor
sorry not only is my wiring skills lacking so is my reading comprehension of anything pertaining to it lolOriginally Posted by jakksfor20
Capo di tutti capi
#askgirlcode
Sent from my S4 > Mason, OH
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
ZHPMafia.com Authorized Vendor
i really got 2 switches with the shade one is from a 5 series and is a switch like shown(but larger with thick wires) but wires are different colors and pin locations are different i can work the shade with it but the shop cut the wires short and is going to be a mess to splice into(as well as will not fit where i want to put it) the other is the shade button (the real one) but no wire harness for it
Enforcer
IMO, you don't want to use that switch as it has comfort features.
After looking at different power shade drawings and not finding the right colored wires, I searched the part # on that switch. That is a rear window switch for an early E39. Terminal 5 (Brown) is Ground, Terminal 6(Gray/Black) is for the light, 3 (Gray/Brown) is Close/Up and 4 (Gray/Red) is Open/Down.
http://www.bmw-planet.com/diagrams/r...9old/index.htm
body/body electrical/central body electronics/either rear door
http://www.realoem.com/bmw/showparts...61&fg=35&hl=13
Last edited by jakksfor20; 10-31-2013 at 05:30 PM.
Posting Permissions
Reply With Quote
