Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 1 of 3 123 LastLast
Results 1 to 10 of 23
  1. #1
    Join Date
    Jan 2013
    Location
    Central California
    Posts
    687

    How does this rtab kit look?

    I'm getting ready to do my rtabs. Found this deal on some Lemforder rtabs and limiters. Does anybody see any issue going with these? I only want to tighten the toe on the back end but the last thing I want is a harsher ride.
    Last edited by Dave1027; 11-06-2013 at 04:00 PM.

  2. #2
    Join Date
    Jun 2012
    Location
    Montreal, Canada
    Posts
    1,939
    The part # doesn't look right on this... You should be looking for either 33326770786 (non-M) or 33326770817 (M3 RTAB - beefier and they're a direct fit).

    RMEuropean has non-M for 12.78 x2 or M3 for 21.90 x2, with limiters at 18.75... Probably the cheapest you can get for the full kit.
    Alex'16 Melbourne Red 328d Touring
    M Sport + M Performance Package

    Gone, but not forgotten: '03 Imola Red 330i ZHP - 6MT


  3. #3
    Join Date
    Jan 1970
    Location
    Huntsville, AL
    Posts
    4,400
    Just pulled my receipt for the new BMW OEM rtab a purchased 8-2012 and the list price was $28.30 each. The tool to do them, will cast more than the bushings.

    BMW Part NO. 33-32-6-770-786
    Last edited by 3ZHPGUY; 11-06-2013 at 05:20 PM. Reason: added part no

    Dinan; Hign Flow Intake System, & Strut Tower Brace
    Turner Motorsports; Underdrive Power Pulleys
    Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
    Stewart High Performance Water Pump
    Hawk High Performance Street 5.0 Brake Pads
    Brembo Rotor

    The purposeful face of a formidable athlete:

    The spine-tingling 330i Performance Package.

    Purchased CPO on 12/23/2006 with 28,090 miles

  4. #4
    Join Date
    Sep 2011
    Location
    San Francisco, CA
    Posts
    6,847
    I think the one in the ebay is the old part number that was superceded by the 786 one.

    I used 33 326 770 817.. Z4M RTABS.



    There is some information here from vorshlag:

    http://www.vorshlag.com/product_info...roducts_id=515

  5. #5
    Join Date
    Jan 2013
    Location
    Central California
    Posts
    687
    Quote Originally Posted by alexandre View Post
    The part # doesn't look right on this... You should be looking for either 33326770786 (non-M) or 33326770817 (M3 RTAB - beefier and they're a direct fit).
    I see what you are saying. I googled the part number and it comes up as an f'ing "Uro" brand part.

  6. #6
    Join Date
    Jun 2012
    Location
    Montreal, Canada
    Posts
    1,939
    Don't buy from Vorshlag though... "Bushings provided may be Lemforder or Meyle branded depending on availability." (Meyle is garbage)
    Alex'16 Melbourne Red 328d Touring
    M Sport + M Performance Package

    Gone, but not forgotten: '03 Imola Red 330i ZHP - 6MT


  7. #7
    Join Date
    Sep 2011
    Location
    San Francisco, CA
    Posts
    6,847
    Quote Originally Posted by alexandre View Post
    Don't buy from Vorshlag though... "Bushings provided may be Lemforder or Meyle branded depending on availability." (Meyle is garbage)
    I wouldn't buy factory parts from them but their other products are great. I actually got OEM ones for the RTABs.

  8. #8
    Join Date
    Jan 2013
    Location
    Central California
    Posts
    687
    The rtabs (with limiters) arrived from OEMbimmerparts. Lightning fast shipping.

    They are Lemforders and the part number says 271191 01 009. It also says "Cross No. 33326770786" so I got exactly what I wanted. They look exactly like Derbo's pic above on the right with the small gaps. I think oem's plus limiters is a good balance for my needs.

  9. #9
    Join Date
    Jan 2013
    Location
    Central California
    Posts
    687
    Ended up pulling the Lemforders plus limiters out and installing Whiteline polys. More road noise but with better tracking and stability, it's worth it in my opinion.

    whiteline-rear-trailing-arm-bushings-bmw-3series-e46l

  10. #10
    Join Date
    Jun 2013
    Location
    Charlotte, NC
    Posts
    1,255
    That was quick. My poly bushings just came in the mail today, good to hear they're worth the premium.

Page 1 of 3 123 LastLast

Similar Threads

  1. FRent: MIS RTAB Tool
    By Imola.ZHP in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 58
    Last Post: 07-20-2021, 05:48 AM
  2. Anyone have a MIS RTAB tool?
    By MooseX in forum Suspension
    Replies: 5
    Last Post: 05-28-2013, 05:20 PM
  3. RTAB Tool, Anyone?
    By ryrules1 in forum California
    Replies: 8
    Last Post: 10-17-2012, 06:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •