I am a big fan of this one:
https://www.amazon.com/Belkin-Compat...ps%2C98&sr=8-5
I am a big fan of this one:
https://www.amazon.com/Belkin-Compat...ps%2C98&sr=8-5
Looks clean, but I’d like to not block a vent if possible and don’t want to stick anything on the dash
2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover
Right now I’m using a scosche magnet that sticks to the front console.
Pros: low profile and matches the interior. Doesn’t get in the way of any buttons or vents
Cons: the adhesive does not mate well with our cube trims. It works ok with my iPhone 8, but in the summer heat the adhesive doesn’t stick very well and a heavier phone will pull it off. Been brainstorming some ideas to mitigate this as I really like the mount in general.
This is the kind I have
https://www.academy.com/p/scosche-ma...ic-dash-mount-
~ 2005 330ci ZHP Silbergrau | Black cube | Leather ~
Current Mods: Akebono brake pads, Bilstein B4 Rear Shocks, Beisan Systems VANOS Rebuild, G.A.S. DISA O-ring, Morimoto fog lights, StopTech SS brake lines, Subwoofer tennis ball mod, Switchback Angel Eyes (turn signal), Zimmermann drilled rotors.
My project thread ---> http://www.zhpmafia.com/forums/showt...into-a-reality
I’ve heard good things about that brand but alas, I don’t want to stick an adhesive directly on the dash or the CF dash trim.
2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover
I think what you are looking for is something similar to what I have in mine, which is a Bimmian mount. This one mounts directly to the dash with a bolt.
I just stick an adhesive magnetic mount on the plate and use that.
KTqy5RC by botond.pal, on Flickr
PXL_20210606_181331538 by botond.pal, on Flickr
I found something similar online, though it doesn't have the large metal plate and includes the magnetic mount itself. It is not compatible with MagSafe charging but it does include an adapter to at least be able to mount it with MagSafe.
https://www.rennline.com/exactfit-ma...t-sku-pm01-17/
Unfortunately Bimmian is now defunct, so I'm not sure where else you can get one like mine.
That’s the mount I was referring too, I guess I’ll have to do some digging and try to find it or something similar. Rennline quality looks nice
If anyone happens across a used bimmian mount, I’ll throw a finders fee their way
2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover
Found an alternative.
https://www.ebay.com/itm/15183723399...mis&media=COPY
Sent from my Pixel 5a using Tapatalk
I feel like the bimmian one is angled a little more towards the driver no?
2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover
Last edited by WOLFN8TR; 07-31-2022 at 05:04 PM.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k