You’re probably hearing lifter tick. Common after autox or track use. I’d you’re just driving normally, likely low on oil.
My Miata ticks all the time, however.
You’re probably hearing lifter tick. Common after autox or track use. I’d you’re just driving normally, likely low on oil.
My Miata ticks all the time, however.
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Thanks guys. I’m planning an oil change this weekend along with swapping on winters. We’ll see if it does the trick.
Sent from my iPhone using Tapatalk
CCV time on the wife's ZSP
Is there any reason to NOT get this cold weather OE kit?
https://www.ecstuning.com/b-genuine-...oemm54oslv1kt/
Should I take the intake manifold off, or not?
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Best option out there. Easier to pull the manifold but the job can be done with it still installed. If you pull the manifold off, it's a rabbit hole with " while I'm in here"
Replace the iacv grommet and throttle body gasket as well.
Sent from my Pixel 2 XL using Tapatalk
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
I'd say, if youve never taken off the intake manifold, then do it because rabbit hole
~ 2005 330ci ZHP Silbergrau | Black cube | Leather ~
Current Mods: Akebono brake pads, Bilstein B4 Rear Shocks, Beisan Systems VANOS Rebuild, G.A.S. DISA O-ring, Morimoto fog lights, StopTech SS brake lines, Subwoofer tennis ball mod, Switchback Angel Eyes (turn signal), Zimmermann drilled rotors.
My project thread ---> http://www.zhpmafia.com/forums/showt...into-a-reality
The car barely had 105k on it.
My zhp is at 161k and never had the manifold off.
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Pull the manifold. Go ahead and fall down the hole like the rest of us.
Sent from my Pixel 2 XL using Tapatalk
-Corey
2003 Blue ZHP Sedan @ 210k
Dead due to damaged valve. Parts are being transferred to a wagon:
2003 325iT Japanrot 6MT @ 230k
I'm sure I'll find another time in the next 50k to pull the manifold. I'm going to skip it this time.
For a non-manifold job, any other things to purchase?
Throttle body o-ring? Seems like this is rare.
ICV gasket..thingy? Seems rare, too.
Anything else?
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM