Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 709 of 823 FirstFirst ... 209609659699707708709710711719759809 ... LastLast
Results 7,081 to 7,090 of 8230
  1. #7081
    Join Date
    Nov 2013
    Location
    Bay Area
    Posts
    2,973
    You’re probably hearing lifter tick. Common after autox or track use. I’d you’re just driving normally, likely low on oil.

    My Miata ticks all the time, however.


    His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
    Hers: 04 330i ZSP
    2004 325 M56 Steel Blue Metallic - Sold
    Stephen's DD & AutoX/HPDE Build Thread
    Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
    DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
    Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM


  2. #7082
    Join Date
    Apr 2016
    Location
    Katonah, NY
    Posts
    771
    Thanks guys. I’m planning an oil change this weekend along with swapping on winters. We’ll see if it does the trick.


    Sent from my iPhone using Tapatalk

  3. #7083
    Join Date
    Nov 2013
    Location
    Bay Area
    Posts
    2,973
    CCV time on the wife's ZSP

    Is there any reason to NOT get this cold weather OE kit?
    https://www.ecstuning.com/b-genuine-...oemm54oslv1kt/

    Should I take the intake manifold off, or not?


    His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
    Hers: 04 330i ZSP
    2004 325 M56 Steel Blue Metallic - Sold
    Stephen's DD & AutoX/HPDE Build Thread
    Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
    DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
    Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM


  4. #7084
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,919
    Quote Originally Posted by stephenkirsh View Post
    CCV time on the wife's ZSP

    Is there any reason to NOT get this cold weather OE kit?
    https://www.ecstuning.com/b-genuine-...oemm54oslv1kt/

    Should I take the intake manifold off, or not?
    Best option out there. Easier to pull the manifold but the job can be done with it still installed. If you pull the manifold off, it's a rabbit hole with " while I'm in here"

    Replace the iacv grommet and throttle body gasket as well.


    Sent from my Pixel 2 XL using Tapatalk

    His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |

    Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |

  5. #7085
    Quote Originally Posted by stephenkirsh View Post
    CCV time on the wife's ZSP

    Is there any reason to NOT get this cold weather OE kit?
    https://www.ecstuning.com/b-genuine-...oemm54oslv1kt/

    Should I take the intake manifold off, or not?
    Can be done without taking manifold off. I’ve done it twice. First attempt took me a whole day, second attempt was about 4 hrs.


    Sent from my iPad using Tapatalk


    2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |

  6. #7086
    Join Date
    Nov 2013
    Location
    Bay Area
    Posts
    2,973
    Quote Originally Posted by Vas View Post
    Best option out there. Easier to pull the manifold but the job can be done with it still installed. If you pull the manifold off, it's a rabbit hole with " while I'm in here"

    Replace the iacv grommet and throttle body gasket as well.


    Sent from my Pixel 2 XL using Tapatalk
    Yea I was looking at taking off the manifold on my ZHP last year, and it's definitely a "while I'm in there" rabbit hole!


    His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
    Hers: 04 330i ZSP
    2004 325 M56 Steel Blue Metallic - Sold
    Stephen's DD & AutoX/HPDE Build Thread
    Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
    DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
    Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM


  7. #7087
    Join Date
    Nov 2017
    Location
    Seattle
    Posts
    672
    I'd say, if youve never taken off the intake manifold, then do it because rabbit hole
    ~ 2005 330ci ZHP Silbergrau | Black cube | Leather ~
    Current Mods: Akebono brake pads, Bilstein B4 Rear Shocks, Beisan Systems VANOS Rebuild, G.A.S. DISA O-ring, Morimoto fog lights, StopTech SS brake lines, Subwoofer tennis ball mod, Switchback Angel Eyes (turn signal), Zimmermann drilled rotors.
    My project thread ---> http://www.zhpmafia.com/forums/showt...into-a-reality

  8. #7088
    Join Date
    Nov 2013
    Location
    Bay Area
    Posts
    2,973
    The car barely had 105k on it.

    My zhp is at 161k and never had the manifold off.


    His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
    Hers: 04 330i ZSP
    2004 325 M56 Steel Blue Metallic - Sold
    Stephen's DD & AutoX/HPDE Build Thread
    Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
    DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
    Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM


  9. #7089
    Pull the manifold. Go ahead and fall down the hole like the rest of us.

    Sent from my Pixel 2 XL using Tapatalk
    -Corey

    2003 Blue ZHP Sedan @ 210k
    Dead due to damaged valve. Parts are being transferred to a wagon:

    2003 325iT Japanrot 6MT @ 230k

  10. #7090
    Join Date
    Nov 2013
    Location
    Bay Area
    Posts
    2,973
    I'm sure I'll find another time in the next 50k to pull the manifold. I'm going to skip it this time.

    For a non-manifold job, any other things to purchase?

    Throttle body o-ring? Seems like this is rare.
    ICV gasket..thingy? Seems rare, too.

    Anything else?


    His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
    Hers: 04 330i ZSP
    2004 325 M56 Steel Blue Metallic - Sold
    Stephen's DD & AutoX/HPDE Build Thread
    Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
    DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
    Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM


Page 709 of 823 FirstFirst ... 209609659699707708709710711719759809 ... LastLast

Similar Threads

  1. Random Picture Thread
    By tripod06 in forum Everything Non ZHP (the place for non-ZHP photos)
    Replies: 1142
    Last Post: 07-17-2023, 08:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •