Page 47 of 48 FirstFirst ... 3745464748 LastLast
Results 461 to 470 of 471

Thread: Official Thread -- Will these wheels fit on my car?

  1. #461
    Join Date
    Jan 2016
    Location
    Chicago area
    Posts
    1,632
    Quote Originally Posted by ZHPizza View Post
    You might want to contact Apex and ask them about it since they advertised these as a concave non-m fitment that didn't require fender rolling or extra camber.
    I don't recall seeing that. I think somebody contacted them and they recommended the flat version.

    https://www.groupbuyparts.com/group-...s-q1-2017.html

  2. #462
    Join Date
    Mar 2017
    Location
    Boston
    Posts
    241
    Quote Originally Posted by Aeternalis View Post
    Another poster on this board runs a set of EC-7 @ 18x9 ET42 (255/35 tire) and a moderate drop (H&R Sport) with no issues. Square ET30 *might* be too much without a roll or pull.
    Fitment pics: http://www.zhpmafia.com/forums/showt...083#post505083


    Quote Originally Posted by ZHPizza View Post
    Looks like not many people have tried it, but I'm thinking it would work with a 235 tire. This guy managed with a 245/35 and some rolling/extra camber. You might want to contact Apex and ask them about it since they advertised these as a concave non-m fitment that didn't require fender rolling or extra camber.

    Oh here's another dude that pulled it off. Not sure what tire size.
    Thanks guys, I'll look into it. Also considering BW TE:AL 18x9, which BW claims will fit ET 27 up front ET 42 rear.

    Josh

  3. #463
    Join Date
    May 2015
    Location
    MA
    Posts
    3
    Bumping this back up...Tire Rack is telling me I'll need to roll the rear fenders with this setup (stock ZHP suspension). Based on reading through this thread it seems like this should work but would appreciate any feedback from folks who have run this.

    Front: 18x8.5 ET35; 225/40ZR-18
    Rear: 18x9.5 ET40; 255/35ZR-18

  4. #464
    Join Date
    Nov 2016
    Location
    Charlotte, NC
    Posts
    2,330
    Quote Originally Posted by nfaust View Post
    Bumping this back up...Tire Rack is telling me I'll need to roll the rear fenders with this setup (stock ZHP suspension). Based on reading through this thread it seems like this should work but would appreciate any feedback from folks who have run this.

    Front: 18x8.5 ET35; 225/40ZR-18
    Rear: 18x9.5 ET40; 255/35ZR-18
    Front should be fine. Rear might be close. Sedan or coupe? And what tire?

  5. #465
    Friend asked me if I wanted his wheels. VMR701 19x8.5 ET35, 19x9.5 ET45. Anyone run/ran this setup? Sedan with stock suspension.


    Sent from my iPhone using Tapatalk

  6. #466
    Join Date
    Dec 2016
    Location
    Greensboro, NC
    Posts
    3,215
    Quote Originally Posted by JETSET303 View Post
    Friend asked me if I wanted his wheels. VMR701 19x8.5 ET35, 19x9.5 ET45. Anyone run/ran this setup? Sedan with stock suspension.


    Sent from my iPhone using Tapatalk
    Youíll be just fine.
    Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual

    Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
    M3 Dead Pedal | M3 Front Seats | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots

    Awaiting Install: M3 Wing Mirrors

  7. #467
    Join Date
    Nov 2016
    Location
    Charlotte, NC
    Posts
    2,330
    Quote Originally Posted by JETSET303 View Post
    Friend asked me if I wanted his wheels. VMR701 19x8.5 ET35, 19x9.5 ET45. Anyone run/ran this setup? Sedan with stock suspension.


    Sent from my iPhone using Tapatalk
    Definitely need some thin tires though. 19" is big for a non-m e46.

  8. #468
    Okay. I am pretty sure this will work, but want to bounce it off you guys first.
    VMR 703
    18x8.5 et35 with 225/40r18 in front
    18x9.5 et33 with 255/35r18 in the rear



    Sent from my iPhone using Tapatalk

  9. #469
    Join Date
    Jun 2012
    Location
    Socal
    Posts
    1,023
    the rears are going to need some fender work

  10. #470
    Join Date
    Dec 2016
    Location
    Greensboro, NC
    Posts
    3,215
    Quote Originally Posted by JETSET303 View Post
    Okay. I am pretty sure this will work, but want to bounce it off you guys first.
    VMR 703
    18x8.5 et35 with 225/40r18 in front
    18x9.5 et33 with 255/35r18 in the rear
    Fronts are fine, but...

    Quote Originally Posted by sillieidiot View Post
    the rears are going to need some fender work
    Yep. I have 18x9.5 ET45 rears (255/35R18 PSS) and with a 5mm spacer Iíll rub. With 3mm+rear passengers Iíll rub. And Iím at -2į rear camber.
    Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual

    Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
    M3 Dead Pedal | M3 Front Seats | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots

    Awaiting Install: M3 Wing Mirrors

Page 47 of 48 FirstFirst ... 3745464748 LastLast

Similar Threads

  1. For Sale (SOLD) : E30 M3 BMW stock 15x7" BBS wheels
    By Terry in forum Other Automotive Classifieds (No ZHPs)
    Replies: 25
    Last Post: 07-24-2013, 12:09 PM
  2. For Sale or WTB: 19" BMW 330 ZHP Replica Wheels / Style 135's
    By rallyegolf in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 10
    Last Post: 05-23-2011, 05:59 AM
  3. Replies: 1
    Last Post: 03-03-2011, 07:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •