Official Thread -- Will these wheels fit on my car?

[Go Horns!]

I'm thinking about getting 18x9.5 et 35 wheels for a square setup (either 255 or 265 tires). Will it fit without any fender mods? How much will camber need to be changed?

I am the stock springs. ZHP Sedan.

http://store.bimmerworld.com/rays-vo...eel-p2057.aspx

[Rovert]

ET35 is a bit sketchy for the rear with wide rubber. I remember putting a 10mm spacer on my ET45 9.5" wheel wrapped in 265 in the back. Just pulling out of the driveway I knew the spacer needed to come off.

I was lowered but I'm guessing any hard compression would rub the fenders and slowly take out your sidewall. Your experience may differ with different tires.

[Taliben]

18x9.5 et35 should be doable with a 255 in the back and rolling/minor trimming if you're lowered. Front you'll need a spacer and more fender mods if you want to run square

[sillieidiot]

i'm pretty sure you need a lot more than minor rolling/trimming if you are lowered. that's what you would need if you're stock lol but i've never tried running those stock. I've fitted the et35 18x9.5 squared on both lowered sedan and coupe and they needed quite a bit of fender mods. it was a PIA. but totally worth it lol

[Go Horns!]

Thanks for the input. Will probably save some money and go with some Apex wheels. Either ARC-8 17x8.5 or PS-7 18x8.5. I bent my front passenger side 135, so I "need" new wheels.

[bshovers]

17x7.5 ET 20 tires are 225/50/17

This would be a winter set up.

Link to craigslist.

http://chicago.craigslist.org/wcl/wto/5203525638.html

[danewilson77]

17x7.5 ET 20 tires are 225/50/17

This would be a winter set up.

Link to craigslist.

http://chicago.craigslist.org/wcl/wto/5203525638.html

ET20.

Sent from my SM-G925V using Tapatalk

[ef_michael]

Thinking of 19x10 et38 vmr csl reps on the rears of my zhp sedan. Im planning on rolling my fenders. Can i get these to fit by just rolling my fenders and using a stretched tire? If so, what tire size?

Michael

[bmwMD]

04 ZHP 4DR
Looking for some assistance from the family...

Stock Sport Suspension
POSSIBLE minor drop with HR or Eibach Lowering Springs with Koni in the future

OPTIONS:

Number 1: 18x8.5 et 35 square setup 235/40

Number 2: 18.8.5 et 45 square setup 235/40 (small spacers / 5mm)

Number 3: F 18x8.5 et 35. R 18x9.5 et 45 235/40 255/35

Number 4: F 18x8.5 et 45. R 18x9.5 et 45 235/40 255/35

Tire i'm leaning towards is the Conti DWS 06

Advice/Opinions/Recommendations Welcomed

[ZHPizza]

04 ZHP 4DR
Looking for some assistance from the family...

Stock Sport Suspension
POSSIBLE minor drop with HR or Eibach Lowering Springs with Koni in the future

OPTIONS:

Number 1: 18x8.5 et 35 square setup 235/40

Number 2: 18.8.5 et 45 square setup 235/40 (small spacers / 5mm)

Number 3: F 18x8.5 et 35. R 18x9.5 et 45 235/40 255/35

Number 4: F 18x8.5 et 45. R 18x9.5 et 45 235/40 255/35

Tire i'm leaning towards is the Conti DWS 06

Advice/Opinions/Recommendations Welcomed

Any of those will work. I had option 3 on my last ZHP and it was a great fitment. If you go with a staggered set, though, I would recommend using the OE tire sizes of 225/40 and 255/35. A 235/40 in the front will be noticeably taller than the 255/35 in the rear.