Those look like those new VMR 810 flow formed wheels that VMR wanted to install on my car for a shoot.
Those look like those new VMR 810 flow formed wheels that VMR wanted to install on my car for a shoot.
Will the wheels in my sig fit any e46 and e90? Searching for a new one and would love to keep my BBS's... lots of possibilities out there, looking from a 2003 ZHP through a 2007 330/335/328 maybe even a 325 if I can find a nice manual tranny.
Since they are 17" I figured unless they are highly incompatible, I should be able to use them on both families without any mods to the body.
__________________________________________________ ____
2003 ZHP 4dr | 145,000 miles (ACTUAL before RIP) | BBS 17"
Hankook Ventus V12
Front: 225/45ZR
Rear: 255/40ZR-17 Hankook Ventus V12 evo2 XL
[ Staggered on square (17x8.5 +38) ]
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
So putting mine in an e90 will look more like an ATV than a track car LOL... But in all honesty, will any normal person tell the difference unless they stare at it? I'd think aesthetically 13mm is pretty negligible? More importantly what about the center of gravity for handling etc.... Will there be any difference there?
Sent from my Nexus 6P using Tapatalk
__________________________________________________ ____
2003 ZHP 4dr | 145,000 miles (ACTUAL before RIP) | BBS 17"
Hankook Ventus V12
Front: 225/45ZR
Rear: 255/40ZR-17 Hankook Ventus V12 evo2 XL
[ Staggered on square (17x8.5 +38) ]
Hi guys,
I really like the looks of these wheels but I'm not quite sure they would fit. Any feedback is appreciated
They are the ESR Wheels SR08 Style https://esrwheels.com/products/sr08
I'm looking at getting the 18 x 8.5 with et30. I'm thinking about running a square set, I have stock Sport suspension at the moment. I dont really want to deal with rolling of fenders either. Will these fit?
Thanks guys!
Any thoughts on 18x9 ET30 ARC-8 fitting up front and rear, guys?
https://www.apexraceparts.com/wheels...c-8-wheel.html
Josh
Another poster on this board runs a set of EC-7 @ 18x9 ET42 (255/35 tire) and a moderate drop (H&R Sport) with no issues. Square ET30 *might* be too much without a roll or pull.
Fitment pics: http://www.zhpmafia.com/forums/showt...083#post505083
5/2003 Silbergrau Metallic ZHP
- Sedan :: 6MT :: Style 68 -
h&r | drvanos | koni | active autowerke | vibrant | akg | turner
Looks like not many people have tried it, but I'm thinking it would work with a 235 tire. This guy managed with a 245/35 and some rolling/extra camber. You might want to contact Apex and ask them about it since they advertised these as a concave non-m fitment that didn't require fender rolling or extra camber.
Oh here's another dude that pulled it off. Not sure what tire size.