Coding Section and General Chat

[az3579]

Can't do this with PA Soft?

Nope.

[ELCID86]

Anyone have PASoft running on Win10?


Thumbs, iPhone, TaT.

[slater]

Anyone have PASoft running on Win10?


Thumbs, iPhone, TaT.

i would also like to know. i never got it running under Windows 7/8/8.1 x64, but never really spent a ton of time on it - the USB drivers installed but then PASoft never recognized them.

i have an old IBM ThinkPad T43 laptop (running XP) that i use for PASoft. it's 10 years old but sadly has better battery life (2hrs on an old 9-cell battery) than my 5-year old lenovo T410 (now running Windows 10 - on battery it lasts about 30min, despite several battery 'restore' procedures).

peter

[ELCID86]

i would also like to know. i never got it running under Windows 7/8/8.1 x64, but never really spent a ton of time on it - the USB drivers installed but then PASoft never recognized them.

i have an old IBM ThinkPad T43 laptop (running XP) that i use for PASoft. it's 10 years old but sadly has better battery life (2hrs on an old 9-cell battery) than my 5-year old lenovo T410 (now running Windows 10 - on battery it lasts about 30min, despite several battery 'restore' procedures).

peter

Wow. That does stink about the newer computer.


Thumbs, iPhone, TaT.

[ELCID86]

Anyone have PASoft running on Win10?


Thumbs, iPhone, TaT.

Bump.

[ELCID86]

This worked like a champ. (post #1).

[az3579]

Anyone have PASoft running on Win10?


Thumbs, iPhone, TaT.

I do...

[ELCID86]

I do...

Thanks for the confirmation. I do to now! For some reason I still can't read my DME module though.


---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46fanatic

[jfh342]

Just wanted to offer up BMW Scanner V1.4 / P.A. Soft to anyone who is interested in purchasing them. I have been ordering them in bulk and reselling them to the general public. Of course to family members there will be no mark up. I just want to give everyone the ability to clear their own codes and make quick changes to their own convenience. I have also quality control and soldered together two sets of pins in order to have them working 100%. Again the reason for this post and not in the for sale thread is so anyone can revisit this and look at it. If interested just PM me.

Tony,
PM sent. Payment sent. Pls check your PMs and confirm receipt.
Thanks,
John