DME Update for the BMW E46 330 ZHP

[terraphantm]

Yes, with PASoft. I have an INPA cable on order. I'm not opposed to trying or to sending to someone that is more experienced...

Well your cable should work fine with WinKFP. And while the initial setup can be tricky the first time, the rest is a pretty easy procedure. Nonetheless, if you'd feel more comfortable, I can flash the DME on my bench or something (and perhaps there's someone more local to you who can help too)

[Washburn]

So.... I guess I can rest assured that mine is up to date, I guess?

[terraphantm]

So.... I guess I can rest assured that mine is up to date, I guess?

I do wish the autologic readout gave the actual software number, but I'm pretty confident you're up to date

[Washburn]

Thanks ! I hope the shop had THEIR software ( auto logic) upto date too.



Sent from my NOT bent iPhone 6 using Tapatalk

[GreatFrog]

That is most likely what I am planning to do if the DISA is still open during normal driving conditions. I may just swap with my cousin's DISA.

Obviously it has been more than two years... but did you finally found out if your DISA still activates under load?

[derbo]

Obviously it has been more than two years... but did you finally found out if your DISA still activates under load?

Nope! Got lazy.


Sent from my iPhone using Tapatalk

[GreatFrog]

Flashed my ECU over the weekend. First tried with WinKFP 5.1.0 that came with the INPA 5.0.2 bundle, got random errors during programming, almost thought I bricked my ECU. Finally WinKFP 5.3.1 saved my ass. Running 7561520 now.

[ELCID86]

Flashed my ECU over the weekend. First tried with WinKFP 5.1.0 that came with the INPA 5.0.2 bundle, got random errors during programming, almost thought I bricked my ECU. Finally WinKFP 5.3.1 saved my ass. Running 7561520 now.

Scary stuff. Glad you got it done.