Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 1 of 3 123 LastLast
Results 1 to 10 of 23
  1. #1
    Join Date
    Aug 2011
    Location
    Indianapolis, IN
    Posts
    44

    Finally got one!!

    I've been a lurker for a while and I finally got my ZHP! Picked it up in SC and brought it back to Raleigh.

    I got an '04 OB/NB 6MT with 123k miles.

    She needs some proper TLC and I'll put up some pics when I get the chance for a good clean.

    I'll also be looking to do a little maintenance in the upcoming weekends so if anyone in NC would be interested in joining, I would love for someone else with some experience and a little know how to join.

    Some of the things I plan on addressing soon:
    Sagging headliner/C pillar
    fuel filter
    rear diff fluid
    removing rear tint

    One question from my initial drive. There's a little play in the steering wheel on the highway, I can move the wheel back and forth a bit without any response. The previous owner said that he had the car aligned more neutrally to allow for the least wear on the tires and the play in the wheel is a result, does that sound accurate? I want to get rid of it so I want to know if an alignment is my solution.

  2. #2
    Join Date
    Jun 2011
    Location
    VA/DC
    Posts
    14,445

  3. #3
    Join Date
    Feb 2014
    Location
    Alexandria, VA
    Posts
    2,805
    Congrats! And that could be an alignment issue, I'm not sure though.

    Current:
    1988 BMW 325is
    1996 Toyota Land Cruiser FZJ80 x3 Locked - Restoration/Project Thread on ih8mud.com
    Sold:
    "Scarlett" the 2005 BMW 330i ZHP 6MT - Project/Maintenance Thread
    2011 BMW M3 E92 6MT - Info/Maintenance Thread

  4. #4
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,922
    Car ever had the front control arm bushings replaced?

    Congrats on the purchase.

  5. #5
    Join Date
    Aug 2011
    Location
    Indianapolis, IN
    Posts
    44
    That's a good question, I'm not sure. This the maintenance from the seller: (he also changed the window regulators)

    03/15/10 107235 Serpentine Belts, Oil Change, Air filter
    06/22/10 108638 Rear Stop Light – Driver Side
    09/16/10 109543 Water Temp Sender O-ring 9/16 x 5/16x1/8
    11/30/10 110244 225/40R18 Yokohama Avid Front Tires – Incl Shipping
    12/04/10 110244 Mount & Balance Fronts + Alignment
    02/12/11 110768 CCV Valve, Water Pump, Thermostat, 2- Drive Pulleys
    05/15/11 112708 Oil Change, Air Temp Sensor, Cabin Filter, Hood Badge
    01/29/12 115705 ZKW Bowls Lined with Aluminum Tape- Headlight Lens Polished with Sylvania Kit
    01/21/12 115800 Liner Material Reglued to A-Pillars
    02/05/12 115835 Idle Control Valve Cleaned,somewhat sticky. Lower Intake Boot found with cracks. Removed and cleaned throttle body.
    02/11/12 115835 Installled new intake bellows, throttle body gasket, Ftube
    02/25/12 115882 Vanos Seals, Valve Cover Gasket, Spark Plugs (NGK)
    04/23/12 116282 New Yokohama 255/35-18 AVID
    04/28/12 116282 Mount & Balance Rears
    05/06/12 116314 Alignment – Sears
    11/23/12 118784 Oil Change Mobile 10-30, Fram CH8081
    06/07/12 123450 Oxygen Sensors- Pre Cat

  6. #6
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,922
    It does not look like they were replaced according to that list. I would look into replacing them if they are still the factory ones.

    Might even be able to get a printout of the alignment specs from sears as well to see what it looks like.

  7. #7
    Join Date
    Aug 2011
    Location
    Indianapolis, IN
    Posts
    44
    I have the printout from sears, though I have no idea what all of the different numbers mean. I could post it later if it would aid in the interpretation of the issue.

  8. #8
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,922
    Sure post the specs from the alignment.

  9. #9
    Join Date
    Aug 2011
    Location
    Indianapolis, IN
    Posts
    44
    Will do, I'll post when I get home.

  10. #10
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Woot!

    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

Page 1 of 3 123 LastLast

Similar Threads

  1. Finally going to do it....
    By 94jedi in forum Maintenance
    Replies: 7
    Last Post: 06-06-2014, 10:31 AM
  2. Finally got a ZHP
    By Dbongaduce in forum New Members (or older members who have not introduced themselves)
    Replies: 22
    Last Post: 05-08-2013, 07:16 PM
  3. Finally!
    By otisdog in forum General -- ZHP Related
    Replies: 26
    Last Post: 01-06-2012, 12:30 PM
  4. finally getting around to this
    By Hermes in forum New Members (or older members who have not introduced themselves)
    Replies: 26
    Last Post: 10-07-2011, 05:06 AM
  5. FINALLY...
    By az3579 in forum General -- ZHP Related
    Replies: 22
    Last Post: 05-17-2011, 07:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •