Spec E46 General Chat Thread

[Hornung418]

That Suspension setup. I am very curious on its mannerism. at $2600 idk..lol

What did your Ground Control run you?

Also keep in mind that the idea is to out drive the others, not have the most money and buy the best stuff.

I am curious to see what feed back the set ups get after a few track sessions.

Sent from my GS3.

[derbo]

What did your Ground Control run you?

Also keep in mind that the idea is to out drive the others, not have the most money and buy the best stuff.

I am curious to see what feed back the set ups get after a few track sessions.

Sent from my GS3.

My GC ran me about 1800 then some changes in my springs probably nets me around the cost of the $2600 of the MCS SA setup.

[Hornung418]

Okay. Good to know. These are single adjustable from what I understand. And the spring rates are fixed.

The only thing that would set these cars apart are the weight (as there is only a minimum listed) and the rear differential. 3.46 LSD or 2.93 Open...

Sent from my GS3.

[derbo]

Okay. Good to know. These are single adjustable from what I understand. And the spring rates are fixed.

The only thing that would set these cars apart are the weight (as there is only a minimum listed) and the rear differential. 3.46 LSD or 2.93 Open...

Sent from my GS3.

Suspension
MCS single adjustable non-remote reservoir shocks with 750/850 springs.
Front camber plates and rear shock mounts w/ spherical bearings.
Polyurethane/Delrin control arm bushings.
Sway bars must be steel, non-bladed, using stock mounting location.

MCS shocks 2649.99
Hyperco springs $299.99
Camber plates/RSM ?????
Sway bars ????


Damn this is one nice suspension setting. I like this setup except those 750/850 springs is heavy as helll .

[derbo]

Damn I want this exhaust setup, but it's not CA street legal.