Or you could do the old fasion way, just check the plug to make sure prior to purchase.
Or you could do the old fasion way, just check the plug to make sure prior to purchase.
Ahh I see what you mean, lazy SOB!!!
Most of the good websites will not use stock photos, so I you go with the realoem, that should show the proper connectors. Once you find the P/N and a good pictures then goto amazon.com to pull your part that you need.
Not dane, the people who posted the pic! Well maybe dane too.. LOL
So....looks like I missed out. Cant find em on Amazon anymore
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
So get them from the place I posted lol.
"I don't care if the door gaps are straight. When the driver steps on the gas I want him to sheet his pant's." Enzo Ferrari
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Got em both of Amazon for $193.76 shipped......
1 - Bosch 17215 Oxygen Sensor, OE Type Fitment
1 - Bosch 17216 Oxygen Sensor, OE Type Fitment
They only had a few left so I jumped on eeet.
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Earlier this week, I ordered Bosch 17215 & 17216 O2 sensors (front bank and rear bank, respectively) for my car's 100k mi birthday. The boxes arrived and had the correct labels on them.
Upon inspecting the part number on the O2 sensors themselves, they were both 17215 and were identical. d'oh! Did Bosch put the wrong part in one of the boxes?
I removed the O2 sensors from my car to investigate. The ones that came out were 17215 & 17216, but they looked identical (same wire length, connector, etc) except for the wire insulation: 17216 has gray insulation while 17215 has black.
I called my local Kragen to see if they had a 17216 in stock that I could examine. They didn't, but they said that their computer shows that 17215 should fit both front & rear bank... although they did have 17216 listed as well. Very odd... especially considering they were different prices!
Based on the info from Kragen, I decided to give it a shot - I installed the new 17215 in both banks. Took it for a drive - let it warm all the way up, did a few redline shifts.... runs great!
At this point I'm going to venture to guess that they are indeed identical except for the wire insulation color.