Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 9 of 9
  1. #1
    Join Date
    Mar 2014
    Location
    Pasadena, CA
    Posts
    14

    Saggy front bumper fix doityourself

    Below is a little writeup on what I did to fix my saggy front bumper on my 330i.
    Things I used:
    1 Permatex PermaPoxy - 5 Minute Plastic Weld Epoxy
    ~20 BMW Plastic Spread Rivets 51118174185
    A C Clamp
    A flat head screwdriver
    wire cutters
    ~1hr of work
    ~4hrs to let the plastic weld do its job

    **My front bumper didn't have foglights and fender liners so you might additional equipment/parts if you have this.

    First some background story. You can skip this and just go down to the pics.
    When I got my ZHP the first thing I noticed was that it had a loose front bumper.
    At the lot, I couldn't tell what the issue was, I noticed that the bumper brackets didn't seem to be in place so I assumed the brackets needed to be reseated.
    I went ahead and purchase the car and decided to deal with the bumper later.
    When I took the bumper off, I noticed that both bumper brackets were cracked.
    I looked for the bracket panels online but didn't find them even though they both have their own OEM Part #.
    At first I thought I had to either get a new bumper or find a used one.
    I found a craigslist ad for bumper repairs, I send them pics of my broken brackets but was told that they couldn't fix it.
    One day, I was in autozone and saw something called Plastic Weld and decided to give that a try.

    There's probably different and better ways of doing this, but below is a description of what I did.


    First, I took off all the front black moldings.
    I removed all the black rivets and two small bolts from the bumper.
    I'm missing the foglights and the fender liners so I didn't have to worry about those.


    I removed both trim pieces below the headlights and pulled the bumper out.


    This is my right bracket panel.


    Only the top part of the bracket was cracked, the bottom part was fine.


    I forgot to take a picture of the Plastic Weld I use but here's a pic I found online.
    Squeeze, mix and apply.


    I applied the plastic weld between the crack and used a C clamp to hold the piece in place.


    I did a light coat first, above and below the crack.


    Once it hardened; ~5mins, I removed the C clamp. I got a little happy and applied a generous amount on the top and smeared some in the bottom but made sure I didn't leave any plastic weld bumps so I wouldn't have a problem putting the bumper back.


    This is my left side bumper bracket panel.


    The top part was cracked, same as the right side but this one had a broken piece at the bottom.


    The good thing was that the broken piece was still in the car, somebody had screwed into the plastic piece were the bumper bracket rests.


    I plastic welded the broken piece first. Same as before, first with a light coat between the crack, top and bottom.


    Once the broken piece was welded, I repeated the same procedure I did earlier on the right bracket to weld the crack on top of the left bracket.
    I put a light coat of plastic weld between the crack, top and bottom.
    I used a C clamp to hold the cracked piece in place for about ~8mins.
    Once it hardened, I took the the C clamp off and put a generous amount of plastic weld.
    I left the bumper sit for about 4 hours.


    After about 4hrs, I checked the plastic weld and it was really hard so I went ahead and put the bumper back into the car. No more saggy bumper for me .


    It's been about a month since I did this and the plastic weld is still holding strong.

    I hope this writeup helps or at least give you some ideas to do it better.

  2. #2
    Nice were up. Your inside brackets were actually breaking? Wow.

  3. #3
    Join Date
    Mar 2014
    Location
    Pasadena, CA
    Posts
    14
    Thanks,
    Something happened to the bumper, I'm assuming it got stuck on those concrete things on parking lots.

  4. #4
    Join Date
    Mar 2011
    Location
    Bay Area, CA
    Posts
    605
    Nice write up! I encountered this problem many years ago and never got around to fixing it. Funny to see the diy on the same color car as me.
    trancenation's Alpine Weiss ZHP

  5. #5
    Join Date
    Mar 2014
    Location
    Pasadena, CA
    Posts
    14
    Do you still that issue or did you do something different?

  6. #6

  7. #7
    Join Date
    Mar 2014
    Location
    Pasadena, CA
    Posts
    14
    Thanks!

  8. #8
    Join Date
    Oct 2016
    Location
    Atlanta/Macon, Georgia
    Posts
    573
    A long shot but any way you can get the pictures re uploaded? I’m trying to tackle my front bumper as well and upon inspection, it seems like the actual bracket on the bumper that mounts to the white hanger is broken on my car ��

    2004 Titansilber Metallic BMW 330i ZHP

  9. #9
    Join Date
    Oct 2016
    Location
    Vermont
    Posts
    588
    The lower facia on my DD is bent down after hitting a raccoon at 70 mph (he sure had a surprised look on his face). I was very surprised it didn’t break anything.
    2004 BMW 330i ZHP (52k miles), Jet Black with black leather, MFactory LSD (3.38) with Z4 cover, 18"x8.5" ET38 APEX Arc-8's (Anthracite) with 245/40 Michelin PSS', Koni Sports with factory springs and front and rear reinforcement plates, Shark Injector, Corsa TSE3 cat-back exhaust, TMS under-driven pulleys (water & steering), CDV delete, TMS CF strut brace, K&N CAI, GAS DISA rebuild, TMS pedals, Wheelskins steering wheel cover, roller tray center console, black-out grilles, and WeatherTech mats

Similar Threads

  1. Replies: 21
    Last Post: 09-06-2014, 12:21 PM
  2. WTB: M TECH zhp front bumper
    By mbeckel in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 1
    Last Post: 07-25-2014, 10:12 AM
  3. Custom Zhp Front Bumper
    By bmw_knight in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 3
    Last Post: 11-05-2013, 06:20 AM
  4. Front bumper needed!! Wtb
    By dann320 in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 0
    Last Post: 10-01-2013, 05:54 AM
  5. Front Bumper Clean-Up
    By EmDeeAr in forum General -- ZHP Related
    Replies: 13
    Last Post: 07-25-2013, 05:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •