White it is. That’s the one I picked as well.
Wiseguy
White it is. That’s the one I picked as well.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Wiseguy
Installed the Apex studs and the KICS R40 Lug nuts finally. I originally bought all 75mm studs but with a 12.5mm spacer on the rear they didn’t come flush with the studs so I ordered a set of 90mm studs for the rear.
Front
Rear
Also cleaned up the Brembo calipers.
Ran into an issue with two of the front dampers. They apparently didn’t use anti seize when installing them, they are stuck inside the pistons. I let them soak in some PB Blaster for awhile to see if they loosen up.
Last edited by WOLFN8TR; 09-06-2018 at 12:11 PM.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Capo
new lugs look perfect on your ARC-8's Gary! Awesome choice!!
Big Earner
lug/stud fitment is top notch. well done.
Boss
Beauty Gary!
Sent from my SM-G955U using Tapatalk
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
Wiseguy
Thanks...
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Wiseguy
The wheels look great!
The calipers, not so good!
Sent from my iPhone using Tapatalk
Dinan; Hign Flow Intake System, & Strut Tower Brace
Turner Motorsports; Underdrive Power Pulleys
Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
Stewart High Performance Water Pump
Hawk High Performance Street 5.0 Brake Pads
Brembo Rotor
The purposeful face of a formidable athlete:
The spine-tingling 330i Performance Package.
Purchased CPO on 12/23/2006 with 28,090 miles
Wiseguy
Ya it’s kinda of a bummer. Only 18k on these and found that damper seized inside the piston. UGH!
Oh and some minor mods. I’m running 12mm spacers on the rear. I was getting some tire rubbing on hard dips and speed bumps. It was the typical spot, the rear bumper bolt and bracket. Bye Bye!
Installed this finally. CTEK Mission Control Center.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Wiseguy
I got a new QuickJack 5000 SLX for Xmas, used it to install some Turner Monoball RTABS. Also some Morimoto XB LED Fog Lights.
Turner Monoball RTAB's
https://www.turnermotorsport.com/p-5...shings-street/
Morimoto XB LED Fog Lights
https://www.theretrofitsource.com/bmw-e46-e39-led-fog-lights-morimoto-xb.html
LED FOGS
LED FOGS & HEADLIGHTS
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Messaggero
Quick jack is rad!
Sent from my SM-G900V using Tapatalk
Posting Permissions
Reply With Quote
