LCM Software Update to 4.5 - Enable Triple Flash (and more)! -- $70 + core

[cakM3]

Let's not forget that used units that are 4.0/4.5 are hard to find. New ones can be upwards of $300, depending on where and when you shop...

There's truth to this I shelled out just over $300 for a brand new LCM s/w 4.5 for my ///M from the dealer just because I had to have one....

The cost of this is very fair IMO. Instead of searching long and hard for the elusive 4.0/4.5 software, you can pay less than what you would find those LCMs for and get the same functions.

Props to Terra for providing this and sharing it so those who do not want to pay can do it themselves. (though it's probably more expensive to buy the programmer to do it themselves)

I am in full agreement here. For those who are on the fence doing this, you got to keep in mind that Terra doesn't have to do this at all. I think for the amount of work that he is doing, this is more than a fair price to ask for the service he's offering all of us

Thanks for the kind words guys. I hope I'm not coming across as taking advantage of you guys - that's not my intention. I did try to make this as open as possible, and am offering this as a service because I know that there are a decent number of folks out there uncomfortable with electrical work, especially with small pitch surface mount components. If I ever figure out a way to do the flash over the OBDII port, I'd post that up for free without asking for any compensation.

I can only speak for myself Terra so I will add that I don't see you taking advantage of anyone on the forum. In my opinion I think you're offering a very valuable service for those who will be able to update their LCMs to the desired LCMs with updated s/w. With that said please PM me where I can send in my LCM w/ s/w 3.6 for modifications. Thanks for doing this!!!

1. USERNAME - - - - - - - - - SERVICE REQUESTED
2. Bullfrog --- Firmware Flash
3. cakM3 --- Firmware Flash
4.
5.
6.
7.
8.
9.
10.

[az3579]

. I hope I'm not coming across as taking advantage of you guys -

Dude, you have provided more insight and help with regards to coding anyone has provided anywhere. I don't think you'd be able to take advantage of someone if you tried.

Keep up the amazing work!


P.S. - I hope the pic wasn't offensive... I thought it'd be funny.


Sent from my iPhone using Tapatalk

[Rovert]

You guys are so smart..... dayyyyammm

[johnrando]

Legit

Sent from my SM-G900V using Tapatalk

[WOLFN8TR]

Nice work! I might need to get this done for the ///M when the ZHP sells!

[bimmergofast]

In.

1. USERNAME - - - - - - - - - SERVICE REQUESTED
2. Bullfrog --- Firmware Flash
3. cakM3 --- Firmware Flash
4. bimmergofast --- Firmware Flash (&recode)
5.
6.
7.
8.
9.
10.

[Tnhl1989]

1. USERNAME - - - - - - - - - SERVICE REQUESTED
2. Bullfrog --- Firmware Flash
3. cakM3 --- Firmware Flash
4. Bimmergofast -- Firmware flash and recode
5. Tnhl1989 -- Firmware Flash and recode
6.
7.
8.
9.
10.

Sending mine today.

[TheFinanceGuy]

I need to confirm what SW I have on my car. Should be 3.6- if so, I'm in.

1. USERNAME - - - - - - - - - SERVICE REQUESTED
2. Bullfrog --- Firmware Flash
3. cakM3 --- Firmware Flash
4. Bimmergofast -- Firmware flash and recode
5. Tnhl1989 -- Firmware Flash and recode
6. TheFinanceGuy -- Firmware Flash
7.
8.
9.
10.

[Tnhl1989]

You should be able to with the Bmw scanner

[TheFinanceGuy]

That would imply I had to time to do anything other than open the package....

Hopefully this weekend I'll have time to play.