$ 100 ? Not bad at all. I need to schedule this.
$ 100 ? Not bad at all. I need to schedule this.
That is how much I paid but looking now, the pricing has gone up. Not much though.
Use Code SpecE30 for a slight discount from here http://www.bmaparts.com/catalog-3/ve...ted-components
Free Ground shipping as well
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
In addition to FP, I need to buy one more part: the O-ring 16111184084. Correct ?
Correct. I would replace it
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
^yep.
Sent from my iPhone using Tapatalk
Finally I organized all the ZHP receipts. I only have missing the most recent service (20-Nov-2015). No biggie, I will visit my Indy some day and ask for a duplicate.
This was a good week for the ZHP. This has been replaced:
1. Windshield washer pump and grommet
2. Passenger turn signal (due to condensation)
3. Clear fog lamps
4. A & C pillars
I will post pics of the new fog lamps when weather permits. They look good !
This is a pic of my old passenger turn signal with the condensation problem. I was surprised to see the amount of water in there since condensation started just recently. BTW, the driver turn signal was replaced 8 months ago due to same problem.
Years ago I needed to change one of the headlamp assemblies in my Ford Tempo, because the light bulbs kept failing due to the water inside.
Last edited by fredo; 12-13-2015 at 06:47 PM. Reason: Added info
For those undecided about replacing the A and C pillar covers or just removing the fabric, please check my thread here:
http://www.zhpmafia.com/forums/showt...-amp-C-pillars