2003 Mystic Blue 330i ZHP 6 MT
born in germany | delivered to baltimore | spent time in texas | resides in utah
aFe ProDry S Air Filter | Dinan Stage 1 Software | H&R 27mm Front Sway Bar
Bridgestone RE760 | StopTech Street Performance Pads
BMW OEM Clear Corners & Side Markers | Ziza LED Light Kit | AL Bi-Xenon Retrofit | BSW Soundplicity iPod Integration
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Thought I would put this here. I ran into an issue with my 2.5 Ton Harbor Freight Aluminum Floor Jack. If you have one check for excessive side to side play. My jack got jammed when lowering my car the other day. The large pin that goes thru the pad got jammed against the side of the jack due to excessive play.
Last edited by WOLFN8TR; 03-13-2017 at 08:51 AM.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
I think I have the 2 ton in the garage, but I think something got lost/broken that was holding one of the wheels in and there's not much stopping it from falling off. Any ideas for a fix?
Post a Pic if you can.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Took a look, it's actually the 3 ton Pittsburgh jack.
I think both of these came off.
Broken side
Okay side
The clip that fits into the ridge is missing.
Thanks. I need to check my HF jack when I get home.
Welcome...
Looks like the larger washer will fit over the axle and then a cir clip and your back in action.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Where do I find such a clip?