Do you have a ACE True Value Hardware store in your area? They have everything!
eBay
http://www.ebay.com/itm/300PC-EXTERN...UAAOSw4CFYslwi
Do you have a ACE True Value Hardware store in your area? They have everything!
eBay
http://www.ebay.com/itm/300PC-EXTERN...UAAOSw4CFYslwi
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
You can install the new clip without the tool. But if you had the retaining tool you could remove one of the other cir clips and take it down to the hardware store and match it up.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Had a chance to fit the snap ring on the wheel. The washer on the other wheel looked slightly different. Hope it holds. It seems like it needs some grease.
Next week I'm planning on putting it to use when I take off the winter wheels.
Cool
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
I highly recommend the MaxJax in the review. I have had mine for 3-4 years, it was life changing (seriously!). I also have (3) pairs of the ESCO stands, they are top notch also. I would never another jack stand. I had a pair similar to the Craftsman in which I encountered an incident, which led to the purchasing of the MaxJax.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Harbor freight recall bump.
Sent from my Pixel 2 XL using Tapatalk
-Corey
2003 Blue ZHP Sedan @ 210k
Dead due to damaged valve. Parts are being transferred to a wagon:
2003 325iT Japanrot 6MT @ 230k
Harbor Freight Jack Stands Recalled for Risk of Collapsing.
The Harbor Freight jack stands that we've all bought, borrowed or seen in our friends' garages are being recalled due to a risk of collapsing under load. Go check yours immediately.
In a recall filed with the NHTSA on March 20 of this year, Harbor Freight explains that certain 6-ton jack stands have the potential to disengage their support pawl under shifting weight, causing the stand to drop suddenly. A second recall, filed May 3, extends the recall to 3-ton jack stands. The defect is attributed to aging tooling at the factory that produced the jack stands.
The recall document says that the problem could affect more than 450,000 6-ton jack stands produced between 2013 and 2019 and nearly 1.3 million 3-ton jack stands produced between 2012 and 2020. These jack stands were sold under the Pittsburg brand name, and can be identified by item numbers 56371 or 61196 on 3-ton models, and 61197 on 6-ton models.
Harbor Freight urges anybody in possession of affected jack stands to return them to the store in exchange for a gift card equal to the price of the stands. Any unsold jack stands covered by the recall have been removed from stores. Check on your buddies and spread the word around—these jack stands are ubiquitous, and a failure like this could be fatal.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Always something these days.... first it's the Takata airbag recalls... now this....
better alive than dead as they say...