FS: OEM M3 mirrors for sedan *Socal*

[sillieidiot]

Copy/pasted from my e46f listing. Added ZHPmafia pricing. The mirror motors are 12pin, so for most ZHP owners, you'll need to swap your motors.

I have a pair of Jet Black OEM M3 mirrors that have been modified to fit a sedan. The driver's side glass does have a little browning on the edges (as shown in picture). There is also a small scuff on that same side (as shown). There are some small chips (the big white spots you see are reflections of the lights in my room) on the passenger side mirror but other than that it's in pretty good condition.

This pair came off of Brian N's car. So if you wanted to know how it looked before, just look up his thread.

ZHPmafia price: Asking $450 shipped OBO

Driver's side:






Passenger's side:

[Vas]

Swap motors and it's plug and play? Direct fitment?

[sillieidiot]

Swap motors and it's plug and play? Direct fitment?

well you still have to cut this metal piece on your car. but other than that, yes.

[az3579]

Swap motors and it's plug and play? Direct fitment?

Not as easy as it sounds. Getting the fitment right is a challenge.
The baseplate needs to be modified on the sedans. There's metal that needs to be cut so it doesn't stick out. Also, you need to creating a mounting template for the ribbon cable motor in your existing housing so it can fit properly in the M3 housing. The fitment of this is time consuming.

[sillieidiot]

well technically it is PnP to the car after you cut that strip. which is easy to cut anyways, i just hit it with an angle grinder. but yeah, the time consuming part is aligning the mirror motor. it's easy, just time consuming cause we all want it perfect lol