Think the wing is bolted on from underneath. And if it isn't you have to heat the adhesive up before you attempt to take it off.
Think the wing is bolted on from underneath. And if it isn't you have to heat the adhesive up before you attempt to take it off.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
-Dimitri; 19
98 Dakar Yellow M3Recaro - Ground Control - Macht Schnell - AP - Mashaw - UUC - Schroth - Apex - TMS
Yeah you need to pump the paint with heat. Because it's not able to be directly heated.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Very clean base to start with, im jealous. Always wanted a techno m3
2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover
Very nice, hit me up. I have an E36 M3 that sits in the garage, let's go for a cruise!
Ended up just going ham with the hair dryer and plastic putty knife. Once I got enough space I used a pocket knife to cut the tape away like flesh.
Thanks! Techno is the other color that I really wanted.
Sounds great! I'll be heading to the Napa area for school, so I shouldn't be too far from you.
-Dimitri; 19
98 Dakar Yellow M3Recaro - Ground Control - Macht Schnell - AP - Mashaw - UUC - Schroth - Apex - TMS
It's off and this is on!
Prepping for black paint...
-Dimitri; 19
98 Dakar Yellow M3Recaro - Ground Control - Macht Schnell - AP - Mashaw - UUC - Schroth - Apex - TMS
Right on, which school?
I think I'm going to rebuild my S52 soon, it has leaky valve stem seals and when I did a leak down test I wasn't very happy with the numbers. Still great to drive! Just leaves a cloud of smoke every time I hit the gas!