Does anyone live in or around NYC that can install the Shark Injector Flash or know a shop that does it? None of my shops seem to know or want to even try to mess with it... I'm about to just return it. I didn't buy the charger for it.
I think you just plug it in right? I would email Turner and ask for directions if they didn't send them. I think Turner's (or Conforti's) expectation is that it's a DIY job.
You can pick up a battery charger at Sears (or craigslist). I think the gist of it is that you connect the charger to the battery and plug the shark injector into the OBD port. It does the rest.
Someone that has one can fill in the details...
Current: 2011 E92 M3 l 6 Speed Manual l Lemans Blue l Palladium Silver Leather l Bone Stock
Previous: 2004 330i Imola ZHP l 6 Speed Manual l Sand Beige Leather l Black Cube l VMR V703s l Koni Yellows
AFE CAI l TRS Bi-Xenons l Adjustable Front & Rear Sway Bars l MFactory Helical 3.38 LSD
You need a 10amp constant battery charger connected to the battery during the flash.
Do I really need a battery charger?
Yes! The installation of the Shark Injector requires power from the battery. It needs more power than thebattery can provide without the alternator generating a charge (and it’s obviously not possible to have theengine running). This is why a battery charger is necessary. Can you install the Shark Injector without thecharger? No. The Injector checks for voltage several times during its programming. If at any time it detectsvoltage levels are too low it will give you an Error Code (123 or 124).
http://www.turnermotorsport.com/pages/shark_inj_FAQ.pdf
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k