Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 10 of 10
  1. #1
    Join Date
    Jul 2011
    Location
    Fist City
    Posts
    384

    Oil residue in Intake Manifold??

    So I was recently replacing the lower intake boot on my car...again...and noticed the upper intake boot had also failed...so its time for that one too.

    anyways, i removed the DISA and noticed some oil residue on it and there is some minor oil residue in the intake manifold right there. it's not crazy, but you do notice it in there.

    The car drinks a fair bit of oil, but it's not my daily...i've driven like 2-3k miles the past year and gone through like a quart and a half of oil. The car noticeably smokes at startup in cold weather, but once it's warmed up and been driven for it a bit it goes away and is normal. I've had it in the shop for various other issues and no one has ever noted it running bad or the smoking issue, i even had them look for oil leaks last time and they said it looks fine...

    some research says it might be the intake manifold gasket? i've replaced the CCV & the oil filter housing gasket like 3-4 years ago and 20-30k miles ago. Any help would be great...i'll post some pictures from the app here shortly.

    thanks,

    -tito.

  2. #2
    Join Date
    Jul 2011
    Location
    Fist City
    Posts
    384



    Here are some pictures.


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Jan 1970
    Location
    Lexington, KY
    Posts
    4,922
    I thought this was normal, my disa also was caked with is that stuff. I think this is part of the system that uses the ccv to recycle some fumes and burn them or bring the oil back to the dipstick.
    325i, 2005, 5MT, Silvergrey, leatherette, Sport package; CDV delete, KONI STR-T & KYB Excel-G, Weisslichts, Stewart H2O pump

    328i, 2010, 6MT, Spacegrey, dakota leather, M-sport packages; has a 330 intake but no tune - yet
    http://s900.photobucket.com/user/othibau/media/Junesig.jpg.html][IMG]http://i900.photobucket.com/albums/ac208/othibau/Junesig.jpg

  4. #4
    Join Date
    Jun 2011
    Location
    VA/DC
    Posts
    14,445

  5. #5
    Join Date
    Jun 2011
    Location
    Redondo Beach, CA
    Posts
    1,944
    Looks like a normal amount to me as well.
    2006 CiC 6MT
    ZHP, Cold Weather, Xenon
    Sapphire Black / Black Leather / Black Cube

  6. #6
    Join Date
    Jul 2011
    Location
    Fist City
    Posts
    384
    Thanks guys good to know, wasn't aware there were normal amounts


    Sent from my iPhone using Tapatalk

  7. #7
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Quote Originally Posted by Oli77 View Post
    I thought this was normal, my disa also was caked with is that stuff. I think this is part of the system that uses the ccv to recycle some fumes and burn them or bring the oil back to the dipstick.
    Quote Originally Posted by ELCID86 View Post
    Looks pretty normal to me.


    Thumbs, iPhone, TaT.
    Quote Originally Posted by wsmeyer View Post
    Looks like a normal amount to me as well.
    Yeeeeep.

    Sent from my SM-G925V using Tapatalk
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  8. #8
    Join Date
    Jul 2011
    Location
    Fist City
    Posts
    384
    Dope.

    Also, for some reason this forum is blocked on my work network (most forums aren't), which is why I hardly ever post here. Only time I'm really on is with the App


    Sent from my iPhone using Tapatalk

  9. #9
    Join Date
    Jun 2011
    Location
    VA/DC
    Posts
    14,445
    Quote Originally Posted by RVAzhp View Post
    Dope.

    Also, for some reason this forum is blocked on my work network (most forums aren't), which is why I hardly ever post here. Only time I'm really on is with the App


    Sent from my iPhone using Tapatalk
    I had that issue for a while then it stopped. Kind of a pain...


    Thumbs, iPhone, TaT.

  10. #10
    Join Date
    May 2011
    Location
    Vancouver, BC
    Posts
    813
    Quote Originally Posted by RVAzhp View Post
    Dope.

    Also, for some reason this forum is blocked on my work network (most forums aren't), which is why I hardly ever post here. Only time I'm really on is with the App


    Sent from my iPhone using Tapatalk
    The forum must match some prohibited keywords - I'd guess "mafia" is the culprit.

Similar Threads

  1. K&N intake
    By illirep in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 18
    Last Post: 04-20-2015, 10:29 AM
  2. (Sold) AFE Intake Pro5R Intake Dry
    By derbo in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 51
    Last Post: 07-15-2014, 12:31 PM
  3. For Sale (SOLD): BMW 330 Intake Manifold - $200 Shipped
    By Au2bahn in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 6
    Last Post: 10-14-2011, 12:51 PM
  4. Removing Sticky Wheel Weight Residue
    By M0nk3y in forum Detailing
    Replies: 5
    Last Post: 03-21-2011, 07:59 AM
  5. AFE Intake
    By MasterC17 in forum Performance
    Replies: 1
    Last Post: 02-04-2011, 05:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •