Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 2 of 21 FirstFirst 123412 ... LastLast
Results 11 to 20 of 203
  1. #11
    Join Date
    Sep 2015
    Location
    Raleigh, NC
    Posts
    212
    NIce Post, thanks for sharing

  2. #12
    Join Date
    May 2012
    Location
    Northern Michigan
    Posts
    502
    I'm not used to having a project thread, I've forgotten to update it!

    I recoded the MK60 DSC module to M3 specs for LSD, oversteer, and gear torque control settings. WAY better! More detail here: http://www.zhpmafia.com/forums/showt...730#post452730

    And I replaced my O2 sensors, the bank 2 sensor was clearly fouled, it looked aweful. Now my O2 voltages are consistent between banks.



    Also, my fuel pump was getting tired and wasn't keeping up with the TS2 kit so I upgraded to the M3 fuel pump, and installed the baffle fixture while I was in there too



    Last edited by rkneeshaw; 07-03-2017 at 04:38 PM.
    2003 BMW 330i ZHP
    ESS Twin Screw Stage 2 - Wavetrac - Headers - Borla - BMW Performance
    Turner Motorsports - Powerflex - Hawk Performance

    Build thread: http://www.zhpmafia.com/forums/showt...yan-s-2003-ZHP
    Wheelwell: 2003 BMW 3 Series
    Fuelly: 2003 BMW 330i

  3. #13
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,921
    Awesome

    His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |

    Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |

  4. #14
    Join Date
    May 2012
    Location
    Northern Michigan
    Posts
    502
    Tie rod day. Took me like 30 minutes to do both. Nice easy job. Alignment is scheduled for wednesday.



    I didn't think the old tie rods were that bad, but the steering feels a lot more stable.

    So this year, at about 110k, I've completed the following refresher/maintenance items:
    Fuel pump
    Fuel filter
    Tie rods
    O2 sensors
    Oil filter housing gasket
    Belt tensioner
    FCABs
    Front and rear diff bushings
    Rear subframe bushings
    Upper inner rear control arm bushings
    Valve cover gasket

    Did the RTABs, outer rear control arm bushings, vanos, and spark plugs last year.

    Only thing left to do is front control arms, sways, and shocks/struts and then I'll let my bank account heal. Maybe
    Last edited by rkneeshaw; 07-03-2017 at 04:41 PM.
    2003 BMW 330i ZHP
    ESS Twin Screw Stage 2 - Wavetrac - Headers - Borla - BMW Performance
    Turner Motorsports - Powerflex - Hawk Performance

    Build thread: http://www.zhpmafia.com/forums/showt...yan-s-2003-ZHP
    Wheelwell: 2003 BMW 3 Series
    Fuelly: 2003 BMW 330i

  5. #15
    Join Date
    Jun 2011
    Location
    VA/DC
    Posts
    14,445

  6. #16
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,921
    How's the quality of those rods?

    His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |

    Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |

  7. #17
    Join Date
    May 2012
    Location
    Northern Michigan
    Posts
    502
    Quote Originally Posted by Vas View Post
    How's the quality of those rods?
    Top notch. All the threads came protected with plastic caps, all joints are real nice and tight and pre-greased. I think Lemforder supplies the OEM units, my stock rods had the same red ring around the rubber boot on the rod end (its just dirty in the picture).
    2003 BMW 330i ZHP
    ESS Twin Screw Stage 2 - Wavetrac - Headers - Borla - BMW Performance
    Turner Motorsports - Powerflex - Hawk Performance

    Build thread: http://www.zhpmafia.com/forums/showt...yan-s-2003-ZHP
    Wheelwell: 2003 BMW 3 Series
    Fuelly: 2003 BMW 330i

  8. #18
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,921
    Nice.

    His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |

    Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |

  9. #19
    Join Date
    Sep 2011
    Location
    San Francisco, CA
    Posts
    6,847
    Quote Originally Posted by rkneeshaw View Post
    I'm not used to having a project thread, I've forgotten to update it!

    I recoded the MK60 DSC module to M3 specs for LSD, oversteer, and gear torque control settings. WAY better! More detail here: http://www.zhpmafia.com/forums/showt...730#post452730

    And I replaced my O2 sensors, the bank 2 sensor was clearly fouled, it looked aweful. Now my O2 voltages are consistent between banks.

    [IMG]http://i1113.photobucket.com/albums/k513/rkneeshaw/2003%20BMW%20330i%20ZHP/temporary_4_17.jpg/IMG]

    Also, my fuel pump was getting tired and wasn't keeping up with the TS2 kit so I upgraded to the M3 fuel pump, and installed the baffle fixture while I was in there too

    [IMG]http://i1113.photobucket.com/albums/k513/rkneeshaw/2003%20BMW%20330i%20ZHP/WP_20151001_14_30_43_Pro.jpg/IMG]

    [IMG]http://i1113.photobucket.com/albums/k513/rkneeshaw/2003%20BMW%20330i%20ZHP/WP_20151001_14_30_09_Pro%201.jpg/IMG]

    I thought the M3 pump used clip in fuel connectors not banjo bolts?

  10. #20
    Join Date
    May 2012
    Location
    Northern Michigan
    Posts
    502
    Quote Originally Posted by derbo View Post
    I thought the M3 pump used clip in fuel connectors not banjo bolts?
    The M3 fuel line uses a clip on the end of it, but the hose barb on the fuel pump does not. In fact, the top of the M3 fuel pump looks EXACTLY like our stock fuel pump in every way, except its blue rather than white. The hose barbs are exactly the same.
    2003 BMW 330i ZHP
    ESS Twin Screw Stage 2 - Wavetrac - Headers - Borla - BMW Performance
    Turner Motorsports - Powerflex - Hawk Performance

    Build thread: http://www.zhpmafia.com/forums/showt...yan-s-2003-ZHP
    Wheelwell: 2003 BMW 3 Series
    Fuelly: 2003 BMW 330i

Page 2 of 21 FirstFirst 123412 ... LastLast

Similar Threads

  1. Ryan's ZHP Project
    By ryankokesh in forum Projects
    Replies: 249
    Last Post: 05-26-2016, 05:11 PM
  2. Ryan's Black ZHP Build
    By Ryan_Miami_ZHP in forum Projects
    Replies: 12
    Last Post: 02-28-2012, 11:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •