Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 5 of 5
  1. #1

    P0171, P0174 and Rough idle(Snarling and shuts down engine)

    Hi all

    I've checked some ideas and I looked everything as lower vacuum boot upper vacuum book disa etc on my baby but I couldnt find anything for p0171and p0174 lean engine, I've replaced my ccv but there wasnt rubber plug on it and my car doesnt have vacuum line on ccv. Two days ago she started snarling and rough idle went under 500 almost stopped the engine. Yesterday I was at drive thru and i was paying something then somehow the engine stopped completely I mean just stopped no rough idle or nothing. I dont even know whats going on :/

    What do you think?

    Thank you all.
    FEY

    2004 325Ci-Totaled
    2005 330Ci ZHP- Current

  2. #2
    You have an air leak somewhere, likely a large one. If this were mine, I'd remove and inspect everything from the throttle body to the airbox. Did these codes get thrown right after the CCV replacement? There should be a rubber cap on the CCV body, assuming it has the plastic nipple. Are you certain the 4 breather hoses are connected tightly?
    12 BMW X5 3.5i xDrive (E70)
    12 Audi A4 Quattro 2.0 turbo (the black sheep)
    03 BMW 330i ZHP (E46)
    01 BMW X5 3.0i (E53)
    79 Triumph Spitfire
    73 MGB

  3. #3
    Join Date
    Mar 2011
    Location
    Washington, DC
    Posts
    1,983
    Check the elbow going to TB. there is a leak somewhere post MAF
    - Stuart


    /_________\
    OO=[][]=OO

  4. #4
    Quote Originally Posted by Scott ZHP View Post
    You have an air leak somewhere, likely a large one. If this were mine, I'd remove and inspect everything from the throttle body to the airbox. Did these codes get thrown right after the CCV replacement? There should be a rubber cap on the CCV body, assuming it has the plastic nipple. Are you certain the 4 breather hoses are connected tightly?
    I've changed ccv like 6 months ago and I've replaced lower boot also, I do have K&N air intake and everything is connected tightly, i dont have rubber cap didnt have even on old ccv and i cant find new one to buy :/

    Thank you Scott
    FEY

    2004 325Ci-Totaled
    2005 330Ci ZHP- Current

  5. #5
    Quote Originally Posted by 330i ZHP View Post
    Check the elbow going to TB. there is a leak somewhere post MAF
    I checked that already and its totally fine, I was wondering if my MAF is bad but i have no code for MAF tho
    FEY

    2004 325Ci-Totaled
    2005 330Ci ZHP- Current

Similar Threads

  1. Elusive p0171 and p0174 problems
    By ryankokesh in forum Mechanical | Troubleshooting
    Replies: 19
    Last Post: 08-21-2014, 04:34 AM
  2. Diagnosing P0313, P0171, P0174
    By Tlandreth22 in forum Mechanical | Troubleshooting
    Replies: 7
    Last Post: 12-19-2013, 02:57 PM
  3. P0174 and P0171 SES
    By Dave_B in forum Mechanical | Troubleshooting
    Replies: 68
    Last Post: 05-29-2013, 05:17 AM
  4. Obd2 code P0171 and P0174
    By jreyes19 in forum General -- ZHP Related
    Replies: 24
    Last Post: 04-08-2013, 08:20 AM
  5. p0171 and p0174 with aem cai
    By baileau in forum Mechanical | Troubleshooting
    Replies: 14
    Last Post: 03-06-2011, 03:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •