There is a set of AL headlights on ebay for $600 right now. The AL are better then the ZKW since they do not suffer the burnt bowls.
Do not go aftermarket.
There is a set of AL headlights on ebay for $600 right now. The AL are better then the ZKW since they do not suffer the burnt bowls.
Do not go aftermarket.
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Awesome, Thanks Vas.
think I have my hood and headlights figured out.
started a spreadsheet for parts that I may need but need to take the car apart some more to get a much more accurate list.
Well, My parts list has grown substantially. I have yet to completely tear down the car but I am typing up all the parts I may need. Up to 50 line items at the moment, yikes.
Tomorrow I will have the car towed from the salvage yard to a co-workers place. He is letting me use his second garage bay as a work space and temporary storage unit. My plan is to have the car running at the end of labor day weekend. Labor I will!
I downloaded all the pictures I took form the salvage yard but have not had time to go through them all. I'll post some up tomorrow so everyone can see. Picked up the insurance check today, shopping spree starts tomorrow.
Parts list has grown. Still need some parts around the radiator and condenser. Looking at just north of $2,500 at the moment. Car will be towed to its new home tomorrow and the tear down will commence after work. Cant wait to be back with my baby
http://seiboncarbon.com/store/produc...w-e46-4dr.html
Been eyeing this
So i've always had a suspicion that this vehicle has been in a minor accident. Fog lights were missing the trim piece around them and one was not attached to the bumper properly. The plastic trim pieces under the vehicle and by the tires are all beat to hell. And now i've confirmed my suspicion. The front bumper should be held on by 8 pop rivets. Mine had a screw, two metal tab bolt things, and only 3 pop rivets. the bolts are weird and have a flat metal square tab on one end.
Fixing it right this time. Running my budget there is a lot f room to spare, so while the front of the car is disassembled I am going to replace the T-stat and housing, all the coolant hoses & heater inlet pipe, replacing the oil pan gasket, and going to replace both lower control arms and tie rods. Looks like I have my work cu tout for me. Hoping to do this all in 2 weeks plus a weekend....
Nice. Looking forward to it
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |