BBS CH Size Options

[trancenation]

For all of you folks with BBS-CH Wheels, what size options (17, 18. 19) are you running and are you lowered?

Thanks.

[az3579]

BBS CH015 18x8.5" all around with 245 wide rubber. Lowered on H&R Race Springs.
Had to roll fenders and shave some plastic from the rear wheel well to make them not rub.

20140825-006 by botond.pal, on Flickr

[cakM3]

On my M3 I run 19x8.5 ET20 front and 19x10 ET20 rear






In the pic tires are Falken 452's (245/35 ZR19 front, 275/30 ZR19 rear) - will be changed out this year to Toyo Proxes T1 Sport tires in the same size.


On my ZHP I run 19x8.5 ET35 front and 19x9.5 ET40 rear




Toyo Proxes T1 Sport tires (235/35 ZR19 front, 255/30ZR19 rear)

Rear fenders on both cars are rolled Both cars are set up with BC Racing coilovers and lowered.

[Karl Lazlo]

18x8.5 ET35 with 255 rubber. Stock (ZSP) ride height. No rolling or removal of bits.

[zYx]

CH015 model (18x8.5 et35) 225/40 front, 255/35 back. On stock M-tech springs, rolled rear fenders because it was rubbing. Car is 325CiA.

[kakashi169]

Gosh, someone needs to sell me their set.

[slater]

Gosh, someone needs to sell me their set.

ha! me too! these wheels aren't the lightest (~24lbs for the 18x8.5") but they look perfect on an E46...

[BADCLOWN]

Ill be running the same setup as Charlie on his imola ZHP but on ground control Coilovers

[cakM3]

ha! me too! these wheels aren't the lightest (~24lbs for the 18x8.5") but they look perfect on an E46...

You're absolutely correct Peter but like you said.... they look perfect on E46

Ill be running the same setup as Charlie on his imola ZHP but on ground control Coilovers

I approve of this setup

[iya_e46]

just had mine mounted 4 days ago,

running 18x10 rears on 255/35/18 ET40 and 18x8.5 fronts with 225/40/18 ET35 (planning to add 5mm spacers to the fronts to go ET30)