Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 1 of 3 123 LastLast
Results 1 to 10 of 30
  1. #1

    "ZHP" Control arm bushings?

    My control arm bushings have gotten really bad now that I have driven 1000 miles on it and noticing lots of old spider webs on my brakes and under my car im thinking this car was sitting for a good while, anyways I went to the dealership to get a list of part #'s for tie rods and control arm bushings, I noticed I find that the zhp CAB prt # is 31 12 6 757 623 but at the dealer was given 31 12 6 783 376 I asked him why its different and he said the part number I provided was superseded to this number. Any one know the actual part numbers for the performance package? I'm thinking bmw just got rid of the zhp part and just use the downgraded regular stuff now.
    Z4M FCAB's , M3 Strut Bar , Front Shock Tower Reinforcement Plates , M3 Engine Mounts , ECS Black Kidney Grilles , Satin Black Apex ARC-8 17" x 8.5" Squared set up, Alcantara Coby wrap w/ Blue stitching

  2. #2
    Join Date
    Jan 1970
    Location
    Lexington, KY
    Posts
    4,903
    The bavauto.com site concurs that the 31 12 6 757 623 is the same as the 31 12 6 783 376

    http://www.bavauto.com/fland.asp?par...06%20757%20623
    325i, 2005, 5MT, Silvergrey, leatherette, Sport package; CDV delete, KONI STR-T & KYB Excel-G, Weisslichts, Stewart H2O pump

    328i, 2010, 6MT, Spacegrey, dakota leather, M-sport packages; has a 330 intake but no tune - yet
    http://s900.photobucket.com/user/othibau/media/Junesig.jpg.html][IMG]http://i900.photobucket.com/albums/ac208/othibau/Junesig.jpg

  3. #3
    Join Date
    Jan 2015
    Location
    Vancouver, BC
    Posts
    99
    yup, superseded
    I recommend realoem.com to reference bmw part numbers.

  4. #4
    Forgot about that site its pretty good. Wondering about my control arms, any one know how long they usually last
    Z4M FCAB's , M3 Strut Bar , Front Shock Tower Reinforcement Plates , M3 Engine Mounts , ECS Black Kidney Grilles , Satin Black Apex ARC-8 17" x 8.5" Squared set up, Alcantara Coby wrap w/ Blue stitching

  5. #5
    I got these lying around Name:  uploadfromtaptalk1457677052786.jpg
Views: 1692
Size:  40.7 KBName:  uploadfromtaptalk1457677071839.jpg
Views: 1770
Size:  49.4 KB

    Sent from my SM-G925V using Tapatalk

  6. #6
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,921
    Quote Originally Posted by MtechJon View Post
    Forgot about that site its pretty good. Wondering about my control arms, any one know how long they usually last
    All depends on road conditions.

    As far as the control arm bushings, look into the Z4M units.

    His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |

    Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |

  7. #7
    Join Date
    Feb 2011
    Location
    Deale, MD
    Posts
    1,826
    Quote Originally Posted by Vas View Post
    All depends on road conditions.

    As far as the control arm bushings, look into the Z4M units.
    +1 on the Z4M units. Tighten up the feel just a bit more than stock. Lots of Mafia members are happily using them.

    -Brettski

  8. #8
    Join Date
    Nov 2014
    Location
    Portland, OR
    Posts
    10,243
    I have the Z4M FCABs and really like them. Their part numbers are left: 31107836862, right: 31107836863.

    Although mileage and road conditions matter for the control arms, you should also consider age and the ball joint in there. I don't have any experience with them, but since they're part rubber, and rubber gets old and brittle, you might consider changing them if they're original.

  9. #9
    Join Date
    Mar 2011
    Location
    Philadelphia
    Posts
    1,079
    Quote Originally Posted by MtechJon View Post
    My control arm bushings have gotten really bad now that I have driven 1000 miles on it and noticing lots of old spider webs on my brakes and under my car im thinking this car was sitting for a good while, anyways I went to the dealership to get a list of part #'s for tie rods and control arm bushings, I noticed I find that the zhp CAB prt # is 31 12 6 757 623 but at the dealer was given 31 12 6 783 376 I asked him why its different and he said the part number I provided was superseded to this number. Any one know the actual part numbers for the performance package? I'm thinking bmw just got rid of the zhp part and just use the downgraded regular stuff now.
    There never was a ZHP-specific control arm bushing

  10. #10
    Autozone.com
    Quote Originally Posted by terraphantm View Post
    There never was a ZHP-specific control arm bushing
    I realized that, I miss read a thread about changing that stuff it's just the control arms that are different in zhp


    Sent from my iPhone7 using Tapatalk
    Z4M FCAB's , M3 Strut Bar , Front Shock Tower Reinforcement Plates , M3 Engine Mounts , ECS Black Kidney Grilles , Satin Black Apex ARC-8 17" x 8.5" Squared set up, Alcantara Coby wrap w/ Blue stitching

Page 1 of 3 123 LastLast

Similar Threads

  1. "///M" or "///M Performance" Floor Mats?
    By bjbstewart in forum General -- ZHP Related
    Replies: 18
    Last Post: 04-13-2014, 12:24 PM
  2. ZHP: "330is" or "///M330i"?
    By Crickett in forum General -- ZHP Related
    Replies: 44
    Last Post: 06-16-2013, 09:21 AM
  3. FS: Control Arm Bushings and Trans Mount Bushings
    By Vas in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 7
    Last Post: 04-25-2013, 06:20 PM
  4. Miro 18"x 8" (ET35)-18" x 9" (ET38) staggered setup
    By danewilson77 in forum Wheels
    Replies: 15
    Last Post: 02-02-2013, 08:49 AM
  5. Replies: 1
    Last Post: 03-03-2011, 07:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •