Enforcer
My front strut mount bolts are not long enough to mount my reinforcement plate + M3 OEM strut bar brace. So I need to purchase 6 of the special collared nuts that BMW sells with that strut bar kit (I got the kit used - no nuts). It's BMW part # 51717895241. Anyone got any they're not using?
Blake - 2005 330i ZHP 6-sp
Capo
I don't have any to sell but that's useful info. I'm idly looking for an OEM strut bar and have the reinforcement plates, so I'll have to add these to my list.
Capo
Why not just get them from the dealer?Originally Posted by AggieBlake
Enforcer
Dear Jebus. 51717895241 is $10.10 each from GetBMWParts.com...
5/2003 Silbergrau Metallic ZHP
- Sedan :: 6MT :: Style 68 -
h&r | drvanos | koni | active autowerke | vibrant | akg | turner
Enforcer
Because they want 15 bucks apiece. ECS sells them for around $10 each. I was hoping someone would be willing to sell them for closer to five a piece.
Blake - 2005 330i ZHP 6-sp
Consigliere
Husker at $9.32 each. Still alot.
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Capo
Yeesh, I figured $5 a piece, $10-15 is nuts (pun intended)
Capo
Damn! I did not realize they cost $15 each
Sent from my iPhone6S using Tapatalk
Enforcer
These are funky nuts, almost like threaded sleeves with a hex head. They're countersunk into the strut bar mounting plate.
12 BMW X5 3.5i xDrive (E70)
12 Audi A4 Quattro 2.0 turbo (the black sheep)
03 BMW 330i ZHP (E46)
01 BMW X5 3.0i (E53)
79 Triumph Spitfire
73 MGB
Wiseguy
Just buy 8mm flange nuts with some metal bushings. Total cost would be under $15. Problem solved.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Posting Permissions
Reply With Quote
