Has anyone had experience with an issue like this? Likely cause/fix?
Many thanks in advance.
Messaggero
Has anyone had experience with an issue like this? Likely cause/fix?
Many thanks in advance.
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
Consigliere
Looks like the clip is missing there.
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Messaggero
Could be, although there is something visible there which doesn't show up well on the photo. I am having trouble reading the RealOEM to get information as to what sort of clip that is. Is there access to that part from the wheel well or do I have to pull the bumper?
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
Messaggero
Messaggero
Is the metal clip I think I'm starting to have the sag too on my rear bumper
Sent from my SM-G935V using Tapatalk
Capo
That clip helps hold it up. You will need to loosen the rear bumper, slide it off a bit, and slide it back on to correct it.
BP
2005 330i ZHP / 6MT
Imolarot / Naturbraun
2003 330iT / 6MT
Orientblau / Naturbraun
It's not the car you drive, it's how you drive it.
Messaggero
Thank you. Slide the clip off?
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
Associate
easy fix, remove the bumper from clip, and push the clip upward into the quarter, then bend it slightly away from the vehicle, then the bumper will wedge into it and stay put.
Messaggero
Thanks!
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
Posting Permissions
Reply With Quote
