I believe it depends on how much you roll them. I just did enough to clear 12mm spacers and I don't think I damaged the sealant
I believe it depends on how much you roll them. I just did enough to clear 12mm spacers and I don't think I damaged the sealant
2006 CiC 6MT
ZHP, Cold Weather, Xenon
Sapphire Black / Black Leather / Black Cube
Well I did a more aggressive roll than most so I pretty much cleared out all the gunk until it was bare metal. Then I painted that whole area and rolled/pulled it. Then after that I sealed it with flex seal to cover anything I could have missed after I rolled it. I can't remember if I painted again after rolling it and before the flex seal. Because I was hammering the shit out of the fender too. I think I probably did. You could use the OE sealant with the brush and stuff too. But eh I wasn't going to pay for that lol
Hey if anybody is in need of the fender roller I've got it currently, just shoot me a PM
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Alright, so crazy story here:
I feel like I've thought about this in the past, kind of weird that nobody has asked for the fender roller in the past three years. I never even ended up using it and it had been sitting in my garage since then up until last year when it got mistakingly chucked when my father was cleaning out his garage.
SO, the time has come, if anyone remembers what make and model the roller was/if it came with any other bits please let me know and I'll order a new one for the site right away.
Sorry guys
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Amazon has a bunch of choices.
So whoever has it last holds onto it until someone else needs it? It doesn't get sent back to the original purchaser?
Sent from my ZTE A2017U using Tapatalk