Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 37
  1. #21
    Quote Originally Posted by az3579 View Post
    You da man!
    I looked up Lowes/Home Depot near Guy's address and there's a Lowes about 20 minutes from there. Hopefully we can find a suitable bolt to replace the old one... not sure what the factory thread is, but the head is 13mm.
    You da man lol! We should be able to get it fixed.

  2. #22
    Join Date
    Jan 1970
    Location
    Huntsville, AL
    Posts
    4,327

    2016 Family Reunion Maintenance Day discussion

    Quote Originally Posted by az3579 View Post
    You da man!
    I looked up Lowes/Home Depot near Guy's address and there's a Lowes about 20 minutes from there. Hopefully we can find a suitable bolt to replace the old one... not sure what the factory thread is, but the head is 13mm.
    Lowes is across the street from the hotel. There's also the old Hawk Hardware in Tullahoma. Could also pick up a new one at the stealership before you head out.


    Sent from my iPhone using Tapatalk

    Dinan; Hign Flow Intake System, & Strut Tower Brace
    Turner Motorsports; Underdrive Power Pulleys
    Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
    Stewart High Performance Water Pump
    Hawk High Performance Street 5.0 Brake Pads
    Brembo Rotor

    The purposeful face of a formidable athlete:

    The spine-tingling 330i Performance Package.

    Purchased CPO on 12/23/2006 with 28,090 miles

  3. #23
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,930
    I can bring my set as well if you think it's needed.



    S7 Edge, out
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  4. #24
    Join Date
    Jan 1970
    Location
    Branford, CT
    Posts
    16,043
    It might be a good idea, Dane - in case John's kit doesn't have the right size. Juuuuuuust in case!

    I don't think I can buy a new one from the stealer, Guy - it's cross threaded. I thought the fix for that was to tap new threads in a larger size, no? The factory bolt would be too loose in there in that case.
    BP
    2005 330i ZHP / 6MT
    Imolarot / Naturbraun
    2003 330iT / 6MT
    Orientblau / Naturbraun




    It's not the car you drive, it's how you drive it.

  5. #25
    Join Date
    Jan 1970
    Location
    Branford, CT
    Posts
    16,043
    John -
    I know you want to polish your window trim. Unfortunately, I had totally forgotten to clean my pads from this weekend. I just cleaned them tonight, but they most certainly will not be dry by the time I leave tomorrow morning...

    I can bring my product if you'd like. Frank said he's bringing some of his stuff too, so between the two of us, we should be able to knock this out still. I have other goodies in my kit, just not my pads.

    They're also 6" pads, which are too big to do the window trim properly. I wasn't too concerned with the trim when I did them; I only did my trim while doing my doors, so 6" wasn't an issue for me. A 3" pad would be better suited for the job if we want to do it right...

    Frank, do you have a 3" machine and pads?
    BP
    2005 330i ZHP / 6MT
    Imolarot / Naturbraun
    2003 330iT / 6MT
    Orientblau / Naturbraun




    It's not the car you drive, it's how you drive it.

  6. #26
    Join Date
    Feb 2014
    Location
    Alexandria, VA
    Posts
    2,805
    Quote Originally Posted by az3579 View Post
    John -
    I know you want to polish your window trim. Unfortunately, I had totally forgotten to clean my pads from this weekend. I just cleaned them tonight, but they most certainly will not be dry by the time I leave tomorrow morning...

    I can bring my product if you'd like. Frank said he's bringing some of his stuff too, so between the two of us, we should be able to knock this out still. I have other goodies in my kit, just not my pads.

    They're also 6" pads, which are too big to do the window trim properly. I wasn't too concerned with the trim when I did them; I only did my trim while doing my doors, so 6" wasn't an issue for me. A 3" pad would be better suited for the job if we want to do it right...

    Frank, do you have a 3" machine and pads?
    I have 3inch pads and the backing plate for my Porter cable. I'll bring it along.


    Sent from my iPhone using Tapatalk

    Current:
    1988 BMW 325is
    1996 Toyota Land Cruiser FZJ80 x3 Locked - Restoration/Project Thread on ih8mud.com
    Sold:
    "Scarlett" the 2005 BMW 330i ZHP 6MT - Project/Maintenance Thread
    2011 BMW M3 E92 6MT - Info/Maintenance Thread

  7. #27
    Join Date
    Jan 1970
    Location
    Huntsville, AL
    Posts
    4,327

    2016 Family Reunion Maintenance Day discussion

    I have a Griot's orbital with a 5-1/2 & 6-1/2 pad sets. If anyone needs it.
    Last edited by 3ZHPGUY; 09-28-2016 at 08:35 PM.

    Dinan; Hign Flow Intake System, & Strut Tower Brace
    Turner Motorsports; Underdrive Power Pulleys
    Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
    Stewart High Performance Water Pump
    Hawk High Performance Street 5.0 Brake Pads
    Brembo Rotor

    The purposeful face of a formidable athlete:

    The spine-tingling 330i Performance Package.

    Purchased CPO on 12/23/2006 with 28,090 miles

  8. #28
    Join Date
    Nov 2014
    Location
    Portland, OR
    Posts
    10,189
    It's awesome to see everyone chipping in to help out

  9. #29
    Join Date
    Jan 2016
    Location
    Helena, AL
    Posts
    633
    Quote Originally Posted by az3579 View Post
    John -
    I know you want to polish your window trim. Unfortunately, I had totally forgotten to clean my pads from this weekend. I just cleaned them tonight, but they most certainly will not be dry by the time I leave tomorrow morning...

    I can bring my product if you'd like. Frank said he's bringing some of his stuff too, so between the two of us, we should be able to knock this out still. I have other goodies in my kit, just not my pads.

    They're also 6" pads, which are too big to do the window trim properly. I wasn't too concerned with the trim when I did them; I only did my trim while doing my doors, so 6" wasn't an issue for me. A 3" pad would be better suited for the job if we want to do it right...

    Frank, do you have a 3" machine and pads?
    Yep, got'em covered!

    Frank W.

    Present
    2003 BMW 530iA Saphirschwarz Metallic

    Past
    2006 BMW 330ci ZHP 6MT Silbergrau Metallic
    2014 BMW X1 xDrive35i ///M-Sport Mineralgrau Metallic
    2011 BMW 328i 6MT ///M-Sport Alpenweiss
    1999 BMW ///M Roadster Estorilblau Metallic


    plus an assortment of VW, Honda, Mazda, Chevrolet, Nissan, Toyota, and others over the years


  10. #30
    Join Date
    Jan 1970
    Location
    Branford, CT
    Posts
    16,043
    Thanks guys.
    BP
    2005 330i ZHP / 6MT
    Imolarot / Naturbraun
    2003 330iT / 6MT
    Orientblau / Naturbraun




    It's not the car you drive, it's how you drive it.

Page 3 of 4 FirstFirst 1234 LastLast

Similar Threads

  1. ZHPMafia.com Family Reunion 2016 Official Signup Thread
    By 3ZHPGUY in forum General Discussion
    Replies: 376
    Last Post: 08-03-2017, 08:53 AM
  2. 2016 Family Reunion Road Rally
    By 3ZHPGUY in forum General Discussion
    Replies: 36
    Last Post: 10-26-2016, 03:56 PM
  3. 2016 ZHPMafia Family Reunion Directions
    By 3ZHPGUY in forum Individual Travelogues
    Replies: 3
    Last Post: 09-29-2016, 03:25 AM
  4. 2016 ZHPMafia.com Family Reunion, Donation Thread
    By 3ZHPGUY in forum General Discussion
    Replies: 16
    Last Post: 09-28-2016, 01:35 AM
  5. ZHPMAFIA Family Reunion 2016 September 30th Drawing
    By 3ZHPGUY in forum General Discussion
    Replies: 12
    Last Post: 09-21-2016, 07:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •