Very nice set of rims! I quite like that "JDM" sort of style, myself having TR Motorsport C2. Personally I would prefer a clean look without stickers, but perhaps try it out and see if you like em!
I ended up removing the stickers. Clean is nice, kind of you like your car t.er - clean simple wheels and nothing to distract
Updated OP with current mods/maintenance to date.
Maintenance List (Either OE or OEM parts unless otherwise stated):
- Sparks, valve cover gasket, new tyres (Achilles ATR Sport 2)
- Ignition Coil #2 replaced
- Oil filter housing gasket
- Mechanical Fan replaced with manual transmission electric fan
- Cooling System Overhaul (Motul Inugel Ultra coolant)
- MAF replaced
- Brake Overhaul
- DISA Rebuilt
- Pulleys and belts overhauled
- Driver regulator
- Front suspension overhauled (bar struts/springs)
- Intake boots replaced
- CCV overhaul
- Auto Transmission serviced
- VANOS rebuilt (Beisan)
- Oil pressure switch replaced
- Intake camshaft position sensor replaced
- Oil level sensor replaced
- M3 engine mounts and oil pan gasket replaced
- Rebuilt rear calipers (new seals and new bleeder valves)
- Fuel pump replaced
-SAMCO Silicone Radiator Hoses
-Fuel Sender Unit
-Ignition Coils
-Intake and Exhaust Cam Sensors
-EMP Stewart Water Pump
-Rear subframe reinforced with CMP Auto Engineering plates + Solid Subframe Bushings
-OE Diff bushings
-Thermostat
-All rear suspension bushings refreshed
-Coolant hardlines + Expansion Tank (#2) + manual mountings
Modification List:
- Umnitza Orion V4 angel eyes
- Eagle Eyes LED tailights (dead/sold)
- OEM M3 strut brace (sold)
- ECS Tuning CF strut brace (sold)
- Eonon GM5150
- Ultra-Gauge (WOLFN8TR's thread convinced me!)
- Brushed aluminium/aluminum sedan interior trim
- Projector retrofit (Morimoto Mini H1 with 5500k bulbs)
- Turner Motorsport 27mm front sway bar
- ECS Tuning Billet aluminium dipstick, oil filter cap, and WP pulley
- ECS Tuning magnetic drain plug
- Stud conversion (ECS/Mishimoto)
- Remus muffler
- M3 steering wheel w/ Tri-Stitch SOLD
- BMW Performance handbrake handle
- BMW Performance CF strut brace
- Muteki 20mm open ended lug nuts SOLD
- BMW Performance intake
- Catch can (Radium Engineering)
- Genuine BMW Style 403 F: 19"x8" R: 19"x8.5" -> back to Mishimoto lug nuts
-StopTech Touring Big Brake Kit (ST41 calipers with 325x28mm rotor)
-AP Coilovers with Bilstein B8 rears
-Style 403s sold
-APEX ARC8s sold
-GS6-37BZ swapped in with UUC Motorwerkes Twin Plate Clutch + Flywheel
-M-Factory 1.5 LSD with rebuilt diff + Z4M finned diff (New bearings + Seals)
-Storm Motorwerkes Shift Knob (V1 weighted)
-AME Tracer GT-Vs (18x8.5 ET35 Square wrapped in Michelin Pilot Sport 4 235/40/18)
-Perforated M3 Steering wheel
-CMP Auto Solid RTAB (encapsulated spherical bearing)
-SR45R Muteki Floating Lug Nuts
Future Plans:
- S54B32
-330 rear trailing arm upgrade (purchased - just need to install)
'03 325i 6MT Individual - Estoril Blue
Wow, nice list.
Sent from my SM-G988U using Tapatalk
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture