FS: re-glued A pillar covers

[slater]

these are the original A pillar covers from the estoril coupe. own a piece of history, folks! (LOL)

they were sagging at the bottom, so i did some research and used krylon fabric spray adhesive, which is supposed to be the best product for this job. they are holding beautifully since being glued, but i think the glue might have a been a little too thick in spots, as even though it's supposed to dry clear, there are a few blotches near the bottom where they meet the dashboard.

i thought about trying some fabric spray paint to "re-black" them, but i decided to just buy new A pillar covers and be done with it. so, these would be a good candidate for that if someone wants to try it out. or leave them as-is and enjoy no sag!

$50 plus shipping for the pair!

peter

[Sreten]

I had great experience with 3M 77 adhesive spray for fabric. I've done bunch of them and it never once went through the fabric, just have to wait couple of minutes for the glue to dry and then put them together.

[slater]

I had great experience with 3M 77 adhesive spray for fabric. I've done bunch of them and it never once went through the fabric, just have to wait couple of minutes for the glue to dry and then put them together.

i tried 3M Super77 first. it didn't hold well enough - it actually came apart after a few days of being in the car.

[ELCID86]

these are the original A pillar covers from the estoril coupe. own a piece of history, folks! (LOL)

[Snuffalufigus]

Silly question, would these work on a coupe? My left side A pillar is peeling off like crazy

[ZHPizza]

Silly question, would these work on a coupe? My left side A pillar is peeling off like crazy

They came out of a coupe...a very common one...

[slater]

Silly question, would these work on a coupe? My left side A pillar is peeling off like crazy

yep, these are from a coupe.

[slater]

still for sale...