Nextel's Imola Sedan ZHP thread (another imola sedan?)

[danewilson77]

That's beautiful.

Sent from my S8+

[nextelbuddy]

That's beautiful.

Sent from my S8+

thanks Dane


did the Fab work tonight. overall the fitment in general on the hinges was spot on. i didnt need any shims or have to move and readjust the trunk on the hinges. i just tried securing the trunk lid using the same markings as the stock oem lid and it was as close as you are going to get for spacing and fitnent.

other areas were not as nice. had to drill out the key lock hole and then the key lock mechanism needed to be shimmed from the inside in order to get the cylinder to protrude through the hold, otherwise the cylinder was sunken in very far causing gaps. Had to dremel out material for the manual lock mechanism itself as well to get it to fit properly.Also had to drill out a large hole to route the cable for the manual lock mechanism too. each one of the plastic pop rivet holes also needed to be enlarged. the spots in the factor trunk lid liner that are make shift handles needed to be cut out. i decided to just cut out the fabric handle instead of cutting out 2 large holes in the trunk. tail lights fit nicely as well.. wear your masks people when working with fiberglass.

IMG_20170620_225327 by Shawn Robertson, on Flickr

IMG_20170620_225330 by Shawn Robertson, on Flickr

IMG_20170620_225412 by Shawn Robertson, on Flickr

IMG_20170621_000259 by Shawn Robertson, on Flickr

IMG_20170621_000309 by Shawn Robertson, on Flickr

IMG_20170621_000324 by Shawn Robertson, on Flickr

IMG_20170621_000351 by Shawn Robertson, on Flickr

IMG_20170621_000511 by Shawn Robertson, on Flickr

IMG_20170621_000521 by Shawn Robertson, on Flickr

IMG_20170621_004650 by Shawn Robertson, on Flickr

IMG_20170621_004705 by Shawn Robertson, on Flickr

IMG_20170621_005016-01 by Shawn Robertson, on Flickr

IMG_20170621_005023-01 by Shawn Robertson, on Flickr

IMG_20170621_005315-01 by Shawn Robertson, on Flickr

IMG_20170621_005348-01 by Shawn Robertson, on Flickr

IMG_20170621_005516-01 by Shawn Robertson, on Flickr

[anandoc]

Trunk looks real nice!

[danewilson77]

Damn....

Sent from my S8+

[NoVAphotog]

Are you going to leave it debadged?

[slater]

that's a pretty close match - nicely done all around. looks great!

[nextelbuddy]

Are you going to leave it debadged?

No, i bought another bmw m4 black competition badge to use the ///M badge portion.

The wrap job is not good and already peeling on the edges underneath so i got s refund from the shop after making a complaint and will be putting that towards painting the trunk the right way.

that's a pretty close match - nicely done all around. looks great!

Thanks man!

[BMWCurves]

That looks great.

[holyc0w]

No, i bought another bmw m4 black competition badge to use the ///M badge portion.

The wrap job is not good and already peeling on the edges underneath so i got s refund from the shop after making a complaint and will be putting that towards painting the trunk the right way.



Thanks man!

Damn that sucks, but the ///M badge should look really good. The previous badge looked great.

[az3579]

I'm glad you're painting it.