Page 1 of 83 1231151 ... LastLast
Results 1 to 10 of 825

Thread: Nextel's Imola Sedan ZHP thread (another imola sedan?)

  1. #1
    Join Date
    Nov 2016
    Location
    Atlanta GA
    Posts
    1,252

    Nextel's Imola S54 Sedan ZHP thread (another imola sedan?)

    Car Currently as of 4/28/2017
    2003 Imola 330i ZHP

    DriveTrain:
    S54 (126k miles) with new VAC motorsport coated bearings installed
    E46 M3 cluster coded 100% with proper mileage and updated with all 4 Door LEDs
    6 speed Getrag Transmission
    3.62 M3 LSD w/ axles and complete rear end


    Exhaust:
    S54 header
    S54 midpipe
    Custom 3rd Rear section with Quad exhaust w/ aftermarket CSL diffuser for MtechII bumper


    Suspension and Brakes
    E46 M3 Brakes front and rear
    E46 M3 Coilovers (DGR)
    AKG bushings: RTAB, FCAB, Diff, Engine Mounts
    Turner Motorsport front and rear swaybars
    ZHP Steering Rack retained
    E46 M3 lower FCA
    E46 M3 Rear trailing arms


    Wheels
    18 inch Apex ARC 8
    18x9 et30
    18x10 et25



    Options on Car:
    Bixenon with FX-R retrofit for projector bowl fix
    Natural Brown Leather interior refinished
    Black Cube Trim
    OEM Rear Electric Sunshade
    OEM Park Distance Control
    OEM E46 M3 Power Electric Folding Mirror retrofit
    OEM Alarm
    OEM Automatic Rain/Light Sensor retrofit
    OEM Auto Dim Homelink Mirror retrofit
    OEM Headlight Washer Retrofit
    OEM E46 Rolling Code Homelink
    OEM TPMS retrofit
    OEM Rear Door Sun Shades

    #-----------------------------------------------------------------------------------------------------------------------#
    Car as it sits 10/21/2017

    2017-10-20_0003 by Shawn Robertson, on Flickr
    2017-10-20_0004 by Shawn Robertson, on Flickr
    2017-10-21_0002 by Shawn Robertson, on Flickr
    2017-10-20_0002 by Shawn Robertson, on Flickr




    #------------------------------------------------------------------------------------------------------------------------#
    Car as it sits @ 10/11/2017
    2017-08-28_0001 by Shawn Robertson, on Flickr
    2017-08-28_0002 by Shawn Robertson, on Flickr
    2017-08-28_0003 by Shawn Robertson, on Flickr
    2017-08-25_0008 by Shawn Robertson, on Flickr
    2017-08-25_0002 by Shawn Robertson, on Flickr
    2017-08-25_0004 by Shawn Robertson, on Flickr
    2017-09-30_0001 by Shawn Robertson, on Flickr
    2017-07-12_0010 by Shawn Robertson, on Flickr
    2017-09-12_0001 by Shawn Robertson, on Flickr
    2017-09-12_0002 by Shawn Robertson, on Flickr



    #-------------------------------------------------------------------------------------------------------------------------#




    Car as it sits @ 6/28/2017

    2017-06-23_0005 by Shawn Robertson, on Flickr
    2017-06-23_0007 by Shawn Robertson, on Flickr
    2017-05-30_0001-01 by Shawn Robertson, on Flickr
    2017-05-30_0005 by Shawn Robertson, on Flickr
    IMG_20170512_033245 by Shawn Robertson, on Flickr
    2017-05-09_0010 by Shawn Robertson, on Flickr
    2017-05-09_0008 by Shawn Robertson, on Flickr
    2017-05-09_0003 by Shawn Robertson, on Flickr
    2017-05-09_0001 by Shawn Robertson, on Flickr
    2017-07-12_0010 by Shawn Robertson, on Flickr



    Car Received 10/18/2016

    Future plans with in the next month are a full S54 and 6 speed swap and this thread will be updated with that.

    Hi all, guess its time to start up a project thread for my car. I bought my 2003 Imola 6 speed sedan from Christian at Supreme Auto. great guy to work with from beginning to end.

    Car when purchased:

    2003 Imola ZHP 6 speed
    165k miles
    Black leather interior
    Silver cube trim

    in the below photos these are the night she arrived and you can already tell the headlights will need addressing which i didnt know at the time. th headlights are so dim that the camera at night captures them with no glare or blown out highlights lol i could only see at night with the help of the foglights.

    I will make more posts after this to catch up to show progress.


    Name:  IMG_20161018_230609-01.jpeg
Views: 2213
Size:  2.11 MB
    Name:  IMG_20161018_225139-01.jpeg
Views: 2161
Size:  2.22 MB
    Name:  IMG_20161018_225046.jpg
Views: 2166
Size:  3.78 MB
    Last edited by nextelbuddy; 10-21-2017 at 11:46 AM.

  2. #2
    Join Date
    Nov 2016
    Location
    Atlanta GA
    Posts
    1,252
    11/4/2016


    the first MOD i did was fixing the headlights which suffered from projector bowl burn out. Purchased retrofit kit from Lightwerks. also went ahead and purchased Angel eyes from Khoalty BMW and installed those at the same time.


    Light removal and disassemble

    Name:  IMG_20161104_202125.jpg
Views: 2209
Size:  3.57 MB
    Name:  IMG_20161104_201901.jpg
Views: 1995
Size:  3.31 MB
    Name:  IMG_20161104_201844.jpg
Views: 1952
Size:  3.56 MB
    Name:  IMG_20161104_145249.jpg
Views: 1846
Size:  2.84 MB





    Lights all back together.

    Name:  IMG_20161105_192724-01.jpeg
Views: 1773
Size:  1.79 MB
    Name:  IMG_20161106_132107.jpg
Views: 1777
Size:  3.47 MB
    Name:  IMG_20161106_105335.jpg
Views: 1703
Size:  1.51 MB

  3. #3
    Join Date
    Nov 2016
    Location
    Atlanta GA
    Posts
    1,252
    11/16/2016

    Purchased a 2002 e46 m3 parts car. it had the main bits i was looking for which was the whole swap. slowly going to sell off what parts I can salvage from this car and then hopefully soon have my M54 with ZF 6 speed posted for same in some forums to help off set this cost.

    Name:  IMG_20161116_204238_01.jpg
Views: 1677
Size:  69.0 KB
    Name:  IMG_20161116_204236_01.jpg
Views: 1669
Size:  71.0 KB
    Name:  IMG_20161116_204211_01.jpg
Views: 1640
Size:  62.8 KB
    Name:  IMG_20161116_204200_01.jpg
Views: 1629
Size:  48.8 KB

  4. #4
    Join Date
    Nov 2016
    Location
    Atlanta GA
    Posts
    1,252
    11/19/2016

    Decided to throw in the M3 cluster, LCM and clean up the steering wheel and shift knob. Looking forward to getting all mileage corrected back to my 165k after the s54 swap. Currently there is no tamper dot sine i kept the LCM as well.

    I used a Mr Clean magic eraser and its AMAZING. it took way the yucky shiny from the leather and gave it that nice matte look and feel. so much nicer. even cleaned the tri color stitching very well too.

    Name:  IMG_20161108_183805.jpg
Views: 1659
Size:  1.32 MB
    Name:  IMG_20161108_184058.jpg
Views: 1658
Size:  2.30 MB
    Name:  IMG_20161119_142836.jpg
Views: 1635
Size:  3.32 MB
    Name:  IMG_20161119_142852.jpg
Views: 1614
Size:  3.33 MB

  5. #5
    Join Date
    Nov 2016
    Location
    Atlanta GA
    Posts
    1,252
    11/19/2016

    Decided to do a small photoshoot of the car before i do the engine swap and it was the first time i had her cleaned up and washed since/

    Name:  2016-11-19_0003.jpg
Views: 1564
Size:  1.72 MB
    Name:  2016-11-19_0004.jpg
Views: 1555
Size:  1.70 MB
    Name:  2016-11-19_0005.jpg
Views: 1570
Size:  3.57 MB
    Name:  2016-11-19_0006.jpg
Views: 1582
Size:  1.88 MB
    Name:  2016-11-19_0007.jpg
Views: 1550
Size:  2.03 MB
    Name:  2016-11-19_0002.jpg
Views: 1514
Size:  614.9 KB

  6. #6
    Join Date
    Nov 2016
    Location
    Atlanta GA
    Posts
    1,252
    12/13/2016

    decided to tackle the E46 m3 mirror conversion. when they say this is a conversion they are not lying. I also took the time t get the lower grill and upper hood vents painted black to match the red on black theme with the zhp.

    E46 M3 mirrors with sedan mirror motor swap. (also had upper hood grill and lower bumper grill painted black with the mirror base plates)
    This is a mod that i don't think i ever want to do again. the most ridiculous things to make this work on a sedan are insane. I cant believe that there is not a bolt on aftermarket option with similar looks.

    Cutting and saving baseplates, making templates to get correct holes and orientation to mount said base plate to door, swapping mirror motors with ribbon cables and fabbing up new mirror motor mount base plates with correct orientation and depth ratios for clearance.

    I tried for 2 days to follow WDS wiring diagrams and compared m3 mirror memory modules and wiring to late sedan memory module and wiring diagrams and finally came to the conclusion they are just incompatible systems since everything is controlled by the BUS system.
    I have learned that for this project a dremel was my bestest friend ever.

    here are some pictures of the process which i hope to get added and supplement cakM3 DIY thread since I think it would help.

    thanks to cakM3 for emailing me the now dead Rogue engineering link for the baseplate modification.

    Name:  IMG_20161210_214716.jpg
Views: 1498
Size:  1.72 MB
    Name:  IMG_20161211_123159.jpg
Views: 1508
Size:  3.73 MB
    Name:  IMG_20161211_135710.jpg
Views: 1506
Size:  2.52 MB
    Name:  IMG_20161211_213415.jpg
Views: 1509
Size:  3.16 MB
    Name:  IMG_20161212_194400.jpg
Views: 1461
Size:  1.39 MB
    Name:  IMG_20161212_231444.jpg
Views: 1479
Size:  3.32 MB
    Name:  IMG_20161212_222834.jpg
Views: 1474
Size:  3.63 MB
    Name:  IMG_20161213_090048-01.jpg
Views: 1448
Size:  1.48 MB
    Name:  IMG_20161213_090039-01.jpg
Views: 1429
Size:  1.47 MB
    Name:  IMG_20161213_085951-01.jpg
Views: 1465
Size:  1.97 MB
    Name:  IMG_20161213_085911-01.jpeg
Views: 1517
Size:  2.14 MB

  7. #7
    Join Date
    Apr 2015
    Location
    Wilmington, NC
    Posts
    649
    Quote Originally Posted by nextelbuddy View Post
    Name:  2016-11-19_0002.jpg
Views: 1514
Size:  614.9 KB
    I love that picture. The red leaves look great behind the car.
    Glad to see your hitting the ground running and look forward to seeing your s54 swap. BMW should have done an e46 m3 sedan to begin with.


    Sent from my iPhone using Tapatalk

  8. #8
    Join Date
    Nov 2014
    Location
    Portland, OR
    Posts
    9,210
    I wish normal E46s had come with rounded mirrors, they look so much better/timeless.

    Nice work!

  9. #9
    Join Date
    Jan 2016
    Location
    Chicago area
    Posts
    1,735
    Pretty cool

    Quote Originally Posted by BMWCurves View Post
    I wish normal E46s had come with rounded mirrors, they look so much better/timeless.
    I like the rectangular mirrors.

  10. #10
    Join Date
    Jan 1970
    Location
    Lebanon, OH
    Posts
    37,875
    Nice job Nextel

    Sent by the Pixel XL
    "Flame suit NOT REQUIRED!!!"
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs

Page 1 of 83 1231151 ... LastLast

Similar Threads

  1. Replies: 990
    Last Post: 07-21-2019, 06:51 PM
  2. Tristan's Imola Sedan
    By TristanHunter in forum Projects
    Replies: 22
    Last Post: 01-26-2016, 08:02 PM
  3. Torxuvin's Imola ZHP Sedan
    By Torxuvin in forum Projects
    Replies: 110
    Last Post: 08-16-2013, 11:31 AM
  4. 03/03 330i zhp imola sedan
    By Muggzie in forum BMW 330 ZHPs For Sale (vehicles only)
    Replies: 2
    Last Post: 03-13-2012, 04:41 PM
  5. Just joined looking for Imola Red ZHP sedan
    By imola red zhp in forum New Members (or older members who have not introduced themselves)
    Replies: 35
    Last Post: 09-17-2011, 12:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •