Terra was gracious enough to flash a 3.6 LCM with 4.5 SW and code in the following items before sending it to me:
1. Halogen high-beams with bi-xenon (PWM_WERT2_FL_BIXENON = wert_01)
2. Fog lights allowed with high-beam (FL_UND_NSW_NICHT_GLEICHZ = nicht_aktiv)
3. Front DRL delete (GED_FL_ALS_DRL = nich_aktiv)
4. Front parking lights disabled when low-beam is on (SIDEMARKER_US = nicht_aktiv)
5. Tail-light DRL (FL_DRL_MIT_RL = aktiv)
5. Triple blink - but with 5 blinks
I swapped in the newly coded LCM and everything was working great (including 5 blinks) except for rear DRLs. I did some searching around and found out (here) that for it to work, either 'GED_FL_ALS_DRL' or 'PO_ALS_DRL' should also be set to 'aktiv'.
So yesterday I went out and set PO_ALS_DRL to 'aktiv' using NCS Expert and I was successfully able to enable taillight DRL.
However, this morning I found out that my triple blink functionality is gone. I went back to the backup of the FSW_PSW.TRC file of the LCM module from yesterday to check the state of the CYCL_TI_BLK keyword. Strange enough, I don't even see this keyword in the backed up TRC file. Apart from setting 'PO_ALS_DRL' to 'aktiv', I did not make any other changes to my LCM yesterday.
Question: How do I get my triple blink back (with 5 blinks) using NCS Expert? Hoping one of the coding guys can set me right. Thanks!!