Page 5 of 5 FirstFirst ... 345
Results 41 to 45 of 45

Thread: The Clown's Hauler project thread: 2001 4runner Sport

  1. #41
    Join Date
    Jan 1970
    Location
    Huntsville, AL
    Posts
    3,820
    Quote Originally Posted by ZHP Dave View Post
    Attachment 33780 see if this works. I had a white '16 that was lifted, but I rolled it off road and it turned into a huge ball of fire.
    Looks Great! Howís it working off road? I have a 2018 TRD OffRoad that I havenít put to the test yet.

    Prior to that I had a 2013 Taco TRD OffRoad that was great in the rough.


    Sent from my iPhone using Tapatalk

    Dinan; Hign Flow Intake System, & Strut Tower Brace
    Turner Motorsports; Underdrive Power Pulleys
    Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
    Stewart High Performance Water Pump
    Hawk High Performance Street 5.0 Brake Pads
    Brembo Rotor

    The purposeful face of a formidable athlete:

    The spine-tingling 330i Performance Package.

    Purchased CPO on 12/23/2006 with 28,090 miles

  2. #42
    Join Date
    Jun 2014
    Location
    Houston
    Posts
    118
    Quote Originally Posted by 3ZHPGUY View Post
    Looks Great! How’s it working off road? I have a 2018 TRD OffRoad that I haven’t put to the test yet.

    Prior to that I had a 2013 Taco TRD OffRoad that was great in the rough.


    Sent from my iPhone using Tapatalk
    With a half decent AT even they'll go pretty much anywhere you would want to take a 40k+ vehicle. They obviously have a list of shortcomings, but overall I love the 5th gen 4Runner. So much so that when I lost the last one I bought another

  3. #43
    Join Date
    Jan 1970
    Location
    Huntsville, AL
    Posts
    3,820
    Quote Originally Posted by ZHP Dave View Post
    With a half decent AT even they'll go pretty much anywhere you would want to take a 40k+ vehicle. They obviously have a list of shortcomings, but overall I love the 5th gen 4Runner. So much so that when I lost the last one I bought another
    Yeh, Iíve had a few! Started with a 88 PU then the 13 Tacoma now this. With some junk and Bimmers in between. I was a bad influence on my son though!




    Sent from my iPhone using Tapatalk

    Dinan; Hign Flow Intake System, & Strut Tower Brace
    Turner Motorsports; Underdrive Power Pulleys
    Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
    Stewart High Performance Water Pump
    Hawk High Performance Street 5.0 Brake Pads
    Brembo Rotor

    The purposeful face of a formidable athlete:

    The spine-tingling 330i Performance Package.

    Purchased CPO on 12/23/2006 with 28,090 miles

  4. #44
    Join Date
    Mar 2011
    Location
    Independence KY
    Posts
    1,945
    Power washed the underside today in preparation for the weekend. I work Tuesday-Sunday every week 10 hr days so my brother was nice enough to agree to haul up his compressor for the holiday weekend from Louisville to apply fluid film to the under side of the truck. As some of you may know, Toyota frames have rust issues. My 2001 did and we did about as much POR-15 as we could to get the max life out of the frame. Same applies here but this applies in like 15-30mins with a spray gun. Should only have to do it once a year, twice might be the best route though. I’ll post some pics once done.
    2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, GC coilovers, 2x2 CF MTECH2 diffuser, Sprint Booster/sport button mod, 4.5 LCM, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal
    2017 Toyota 4Runner TRD Pro Cement Gray - OE blackout badges, Innovativ HIDs, Phillips LED fogs, CanvasBack full rear coverings



  5. #45
    Join Date
    Mar 2011
    Location
    Independence KY
    Posts
    1,945
    My brother brought his compressor up from Louisville for the holiday week and sprayed the underside of my truck using Fluid Film. Got everything off of Amazon and split the costs of supplies since he did his truck as well. I couldn't do this work because I work Thurs-Sun from 1100-2100hours and work a ton of off duty details during the holiday season. This took him about 45 mins to do with no lift and just getting under the truck and spraying. I told him to go heavy (as he did on his) just to be on the safe side. We should only have to do this once a year in the late fall but we shall see.

    Untitled by Jacob G., on Flickr

    Untitled by Jacob G., on Flickr

    Untitled by Jacob G., on Flickr

    Untitled by Jacob G., on Flickr

    Untitled by Jacob G., on Flickr

    Untitled by Jacob G., on Flickr

    Untitled by Jacob G., on Flickr
    2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, GC coilovers, 2x2 CF MTECH2 diffuser, Sprint Booster/sport button mod, 4.5 LCM, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal
    2017 Toyota 4Runner TRD Pro Cement Gray - OE blackout badges, Innovativ HIDs, Phillips LED fogs, CanvasBack full rear coverings



Page 5 of 5 FirstFirst ... 345

Similar Threads

  1. The Clown is Back: Progress thread
    By BADCLOWN in forum Projects
    Replies: 453
    Last Post: 11-25-2018, 07:23 AM
  2. Replies: 35
    Last Post: 01-24-2017, 07:24 PM
  3. E92 335i M-Sport Project Thread
    By MiniD in forum Projects
    Replies: 7
    Last Post: 03-13-2016, 05:53 PM
  4. 02' Toyota 4Runner w/ Sport Package
    By MiniD in forum Other Automotive Classifieds (No ZHPs)
    Replies: 0
    Last Post: 03-09-2013, 07:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •