What brake fluid are you guys using?

[Cadeez]

I thought I had some on the shelf, but looks like I used it. Need to bleed em this weekend. As long as it's DOT 4, does it really matter? I don't track, simple DD.

I think this is what I used before
https://www.ecstuning.com/b-ate-part...liter/sl6~ate/

However the OEM fluid seems like a better deal, I can't imagine it really takes three of these for a flush...
https://www.ecstuning.com/b-genuine-...l/81220142156/

[sillieidiot]

Yeah it doesn't really matter. It takes 3 of the OE ones because it's 355 mL per bottle. Usually they come in like 500 mL or like 1 L bottles for other brands.

[John in VA]

I used the BMW fluid last time as the local BMW club chapter had a DIY tech session at the local dealer so I purchased the fluid there. I typically use Valvoline DOT 3 and 4 Synthetic Brake Fluid as it's reasonably priced, readily available so I don't worry about compatibility & works for me.

[san]

I used the BMW fluid


Sent from my iPhone using Tapatalk

[ELCID86]

The blue can.

[Cadeez]

Right on, thanks fellas!

[BMWM3186]

What about the DOT 4 LV (low viscosity) Bentley says to use in the e46?

Sent from my ONEPLUS 3 using Tapatalk

[derbo]

The blue can.

Same as you!

[BMWCurves]

I've been using Pentosin DOT4 LV. Might switch.

[az3579]

Using ATE Typ200 because I do about 2-3 track events per year so I need higher boiling point temp fluid.

Sent from my Pixel using Tapatalk