I've had slotted rotors on previous cars, and don't remember the making much more noise than flat ones. Just put them on, and the tick tick tick is bugging. Are yours ticking?
Enforcer
I've had slotted rotors on previous cars, and don't remember the making much more noise than flat ones. Just put them on, and the tick tick tick is bugging. Are yours ticking?
'03 330i/6 ZHP TiAg
2017 Chevy Bolt
2016 eGolf meh... Gone
Donated: '97 328i (wife's)
Sold: Supercharged '96 318 Convertible
Sold: '05 330/6 ZHP SilverGray
Capo
Zero noise from the rotors.
Only my race pads make noise... lots of it.
BP
2005 330i ZHP / 6MT
Imolarot / Naturbraun
2003 330iT / 6MT
Orientblau / Naturbraun
It's not the car you drive, it's how you drive it.
Campieri
I don't get any ticking from my slotted. You got something stuck in your pads? or dust shields?
Boss
None
Sent from my SM-G950U using Tapatalk
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
Capo
I have BMW Performance drilled rotors. I have zero ticking. I get squeaks from time to time, which just means I need to add some anti-squeal compound on the Hawk HPS 5.0 brake pads.
ZHPMafia.com Authorized Vendor
the only noise I get is from them is in my head when I back out of the garage and see them on the shelf (have had a bbk /slotted rotor setup) that has been sitting there waiting to be installed for like 2 years now lol
Messaggero
I have the ECS Tuning drilled/slotted rotors and StopTech Street Performance pads. No noise at all - just some vibration when breaking hard around the 55 Km/h area...probably due to me not bedding the new pads/rotors properly.
anandoc
2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)
aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes
Capo
I've been getting some of this recently but went away after I swapped to my track pads and did a nice 1st session bedding. The slight noise/vibration has not come back since I swapped back to street pads.Originally Posted by anandoc
You may need a good bedding in to get it settled.
BP
2005 330i ZHP / 6MT
Imolarot / Naturbraun
2003 330iT / 6MT
Orientblau / Naturbraun
It's not the car you drive, it's how you drive it.
Messaggero
Yup, thats the plan. Thing is, I need to find a spot in Toronto where I can do 100km/h -> 30km/h 10 times and not get pulled over. Which is like impossible.
anandoc
2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)
aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes
Campieri
Very true.
One more perk of living where I do... I exit the driveway and can start bedding right away.
Sent from my iPhone using Tapatalk
peter
2004 330i ZHP
2005 330iT ZHP
2010 328iT M Sport
Posting Permissions
Reply With Quote
