Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 3 of 3
  1. #1

    P/S Pressure line replacement

    Can't find any DIYs for only the pressure line, but it looks pretty simple. Can anyone confirm that the process is basically:

    1) lift up/support car
    2) open up P/S reservoir and pump out as much fluid as possible
    3) disconnect P/S pressure line at the 2 points where it connects
    4) install new line with new washers on both sides of banjo bolt
    5) refill P/S fluid, move rack back and forth, refill, drive a short distance, refill

    What are torque specs for the 2 bolts on the line?
    What's the recommended P/S fluid from Autozone or Advanced Auto?

    Here's the part:
    https://www.ecstuning.com/b-rein-par...416774215~ren/

    Thanks

  2. #2
    Join Date
    Feb 2011
    Location
    Valparaiso, IN
    Posts
    3,595
    Makes sense to me, although I don't actually know if that's the correct procedure.

    Apparently you put CHF 11s in... ? I've always used ATF, but just heard that this is oe.
    Last edited by ryankokesh; 08-24-2017 at 06:12 AM.


  3. #3
    Join Date
    Nov 2014
    Location
    Portland, OR
    Posts
    10,244
    Autozone.com
    I believe the user anandoc has replaced his p/s lines, you might ask him.

Similar Threads

  1. Replies: 35
    Last Post: 06-07-2019, 08:20 AM
  2. Need an electric pressure washer
    By HokieZHP in forum Detailing
    Replies: 31
    Last Post: 06-12-2016, 05:49 PM
  3. Replies: 10
    Last Post: 03-25-2015, 11:33 AM
  4. Check your spare's pressure lately?
    By Lanister in forum General -- ZHP Related
    Replies: 22
    Last Post: 01-23-2015, 09:26 AM
  5. Oil pressure switch
    By Tampa330i in forum Mechanical | Troubleshooting
    Replies: 43
    Last Post: 02-01-2011, 02:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •